Clamp Adaptors
Most commonly used with digital multimeters, clamp adaptors expand the abilities of a DMM to include the ability to test current levels. Wide range of adaptors available for a large selection of multimeters from many manufacturers.
Find out more about Clamp Adaptors below.
- Works with several Kewtech testers
- Maximum jaw opening of 24mm
- Rated current of 5A AC
- Measure up to 70A AC
- Suitable for leakage and load current measurements
- Works with several Kewtech instruments
- 40mm jaw opening
- Works with several Kewtech products
- Measure current to 200A AC
- Measures from 0.1mA to 120A AC
- Small 8mm jaw
- Complies to IEC61010-1 CAT. II 100V
- Measure rated current up to 1000A AC
- 68mm diameter jaws
About Clamp Adaptors
The clamp adaptor differs from a normal clamp meter - these instruments are not generally made for reading by themselves but are designed instead to interface with electrical testers such as multimeters to enable them to perform current measurements.
They come in a huge variety of shapes and sizes ranging from ultra-compact for fitting inside electrical cabinets to large sizes for measuring multiple conductors simultaneously or fitting around larger wires. Adaptors can also be made of flexible materials, allowing them to be bent around an application that simply wouldn't be possible when using a clamp meter.
It is important to note that not all clamp adaptors will work with all equipment - please read the description for which tester(s) the clamp you're looking at might be suitable.
