Oscilloscope Accessories
Optional software packages for controlling an oscilloscope's functionality/parameters via PC and carrying cases specifically designed for porting equipment from area to area are all available in this category.
Find out more about Oscilloscope Accessories below.
- Suitable racking plate for the RM300/RM300A
- Not recommended for use as a battery charger
- Rack blanking plate
- Suitable for RM410
- Not recommended for use as a battery charger
- Additional/Replacement Universal AC Adaptor
- Suitbale for the PSA Series 2 or 5, TF930/960 and, I-prober 520
- Type B
- 5.0V/2A
- For use with Aim-TTi's PSA Series 2 and 5 Analysers
- For use with Aim-TTi’s PSA Series 2 and Series 5 Spectrum Analysers
- Determine the frequency of RF sources
- Take relative measurements of amplitude
- High-quality SMA terminated cable has low-loses of up to 6GHz
- SMA to N-type adapters for connecting the PSA to a generator
- BNC to N-type adapters for use with BNC cables
- High quality
- Specifically designed for Aim-TTi
- Not recommended for use as a battery charge
- Soft carry case
- Store and transport Aim-TTi’s PSA Series 2 & 5 Spectrum Analysers
- Interface module
- GPIB Interface Option Retrofits
- Suitable for TG/P/F, TSX-P, and MX-QP series
- Rackmount
- Aim-TTi Equipment 3U rackmount
- 2 & 4 Channel TGA Arbitrary Generators
- Includes half-rack blanking plate
- Not recommended for use as a battery charger
- Suitable for most TTi 3U half-rack power supplies and other instruments
- View on PC
- Installable at any time
- Suitable for PSA1302 and PSA2702
- Single-position tilt stand
- Not recommended for use as a battery charger
- Suitable for instruments in the later Aim-TTi plastic case
- 4U Rack Mount for QL PSUs
- Can mount many combinations
- Includes two 1/3 rack blanking plates
- Two overlapping frequency ranges spanning 3Hz to 3GHz
- Low pass filter reduces noise at low frequencies
- Push-to-Measure function
- Can accommodate up to four ¼-rack PL or CPX400S (single output) power supply units
- Can accommodate up to four two ½-rack PL or CPX400D (dual output) PSUs
- Can hold one QPX1200 or QPX600D Power Supply
- View on PC
- Installable at any time
- Suitable for PSA3605 or PSA600
- 600W output provided
- -20dB output attenuator incorporated
- An "output clip" LED is provided to warn if the output amplitude exceeds 15V
- High-accuracy, general-purpose H-field probe
- Wide dynamic range: 10mA to 20A peak-to-peak
- Attach to any oscilloscope
About Oscilloscope Accessories
Oscilloscopes are powerful and flexible test instruments. To further exploit the range of tests available to electrical test engineers, lab technicians, or automotive engineers, there is a whole load of accessories available including probes and probe sets, adapter plugs, break-out adapters, and spare battery packs for hand-held models.
If you need to convert from BNC to a banana plug or measure voltage drops with a current shunt you will find the cable or sensor adapter here at Tester.
You may already have amassed a fine collection of accessories so why not keep them in a purpose-built carrying case? This will keep your meter and accessories together and ensure that you're always ready to go on a job wherever it may be.
