All Fluke Products

5 x Fluke 1AC II VoltAlert Voltage Detectors (Bundle Pack)

SKU
FLUVT2
Rating:
100%
(1)
Reward Points
:
105
£127.14 £105.95
In Stock
Advice & Support
Price Match Request
Save £43 Off RRP
Fluke 1AC II 5PK Volt Alert 5 pack - 200v to 1000v - Kit

Get five of Fluke's 1AC Voltage Detectors for the price of four with this great value bundle pack!

The Fluke 1AC is essential for any electrician. This portable, easy-to-use voltage detector is a simple, reliable way to check for the presence of AC voltage on an electrical system.

If there's voltage present on the circuit under test, the 1AC's tip will illuminate red and it will also start to sound an audible beeping tone. There's usually no need to make contact with the outlet; as you get close, the 1AC will start to pick up the voltage. Please note that it is possible to disable the beeper if the green start-up button is pressed for longer than two seconds; to reactivate the beeper the Fluke 1AC II VoltAlert Voltage Detector need only be switched off and then switched back on again.

This Fluke voltage detector can detect the presence of AC voltage from 200 to 1000V. To ensure detection is always accurate, the 1AC will constantly test itself using Fluke's Volbeat technology.

Fluke 1AC II voltage detectors are CAT IV 1000V safety rated and are supplied as standard with a two-year warranty.

Fluke 1AC II VoltAlert Voltage Detector Key Features

  • Simple way to check if there's live voltage present within an electrical system
  • Tip glows red and detector emits an audible beep if voltage is found
  • Disable the beeper by holding the green button down for more than two seconds
  • Reactivate the beeper by switching the detector off and then back on
  • Voltage range from 200V to 1000V AC
  • Fluke Volbeat technology included - continuously tests itself to ensure accuracy
  • CAT IV 1000V safety rated
  • Two year warranty included

Fluke 1AC VoltAlert Technical Specifications

Operating Principle Senses the steady state electrostatic field produce by AC voltage through
insulation without requiring contact to the bare conductor. A red glow at
the tip and a beeping noise (if not switched OFF) indicates voltage presence.
Voltage Sensing Ranges  200V AC to 1000V
45 to 405Hz; also a 20V to 90V control circuit model
Detector Tip Style Blade or round, depending on model
Light Source One high intensity red LED
Agency Approvals c CSA us, CE, C-Tick
Safety Rating CAT IV 1000V
IP Rating IP40
Operating Temperature -10 to 50°C
 Operating Humidity Ranges 0 to 95% (0 to 30°C)
0 to 75% (30 to 40°C)
0 to 45% (40 to 55°C)
Operating Altitude 3000m
Batteries 2 AAA alkaline batteries included
1 Reviews
Rating:
100%
(1)
Overall Rating
Write a Review
Write Your Own Review
You're reviewing:5 x Fluke 1AC II VoltAlert Voltage Detectors (Bundle Pack)
Your Rating
Additional Information
SKU FLUVT2
Manufacturer Part Code 2433056
Model Ref Fluke 1AC II 5PK
Country of Origin China
International Enquiry