Fluke T6-600 Electrical Tester, IR Thermometer, 1 AC-II VoltAlert Kit
* Buy a Fluke (Worth £150+ Ex VAT) and Choose a Free Fluke!
Available until 31/08/24. For more details and to see your choice of free Fluke tool - View Offer
Only available from authorised Fluke distributors, such as PASS Ltd. Terms and conditions apply.
This kit includes:
- 1x Fluke T6-600 Electrical Tester with FieldSense Technology and Accessories
- 1x Fluke 62 MAX+ Infrared Thermometer
- 1x Fluke 1 AC-II VoltAlert Voltage Detector
- 1x Fluke C60 Soft Case
For further information regarding the instruments included in this kit, please see the following descriptions.
Fluke T6-600 Electrical Tester with FieldSense Technology Description
The Fluke T6-600 Electrical Tester with FieldSense Technology can be used to measure AC current and voltage without using test leads.* This is facilitated by its 17.8mm jaw and FieldSense technology; for a quick introduction to this product, please see the following video.
The inclusion of FieldSense technology improves the efficiency with which the user can conduct measurements. It also works to improve the practicality and safety of this instrument. Using this technology the operator does not need to connect the tester to the conductor-under-investigation via test leads or metallic contact; this removes the risk of accidental contact with energised wires or incorrect conductors. It also improves the ease with which this tester may be handled, making it suitable for use in difficult-to-access and/or tight spaces. The Fluke T6-600 Electrical Tester with FieldSense Technology is particularly well suited to testing crowded junction boxes and measuring conductors with hard-to-reach endpoints. For further information regarding the Fluke T6-600 Electrical Tester’s FieldSense technology, please see the document titled ‘Fluke’s Note on FieldSense Technology’, listed under the Technical Specifications.
In order to measure AC/DC voltage up to 600V and AC current up to 200A, the 17.8mm jaw is placed around the instrument-under-investigation. This tester is also capable of measuring resistance between 1Ω and 2Ω and may be used to verify voltage and continuity measurements.
The Fluke T6-600 is capable of performing True-RMS measurements for AC voltage and current. Measurements are viewable via the backlit digital display. For further information regarding the Fluke T6-600 Electrical Tester with FieldSense Technology’s measurement capabilities and for information regarding how to operate this tester, please see the ‘how-to’ guide listed under the Technical Specifications.
The simple and convenient design of this product, coupled with its FieldSense technology, means that it can be operated using a single hand, this makes it particularly well suited for use in challenging environments. Adding to its practicality is the included test leads’ compatibility with Fluke’s test clips, ensuring that the Fluke T6-600 can be easily adapted to suit a variety of applications. Further to this, the 4mm SlimReach Probe Tips provided with this instrument are compliant with national electrical standards, again making this instrument suitable for a variety of applications.
Finally, this instrument has been drop-tested to up to 3m (10 feet). The Fluke T6-600 Electrical Tester with FieldSense Technology’s robust and ergonomic design combined with its extensive measurement capabilities make it ideal for commercial and/or light industrial electricians. It has been optimised for efficiency, safety and practicality, without compromising its accuracy and reliability, making this tester ideal for troubleshooting and individual circuit verification applications.
Fluke T6-600 Electrical Tester with FieldSense Technology Key Features
- Measure AC current and voltage without using test leads
- 17.8mm jaw and FieldSense technology make lead-less* measurements possible
- FieldSense technology removes the need for a connection to the conductor-under-investigation
- No need for test leads* or metallic contact
- Improves the efficiency and practicality of the tester
- Reduces the risk of accidental contact with an energised wire or incorrect conductor
- Improves safety
- Suitable for use in difficult-to-access places and/or tight spaces
- Ideal for testing crowded junction boxes
- Suitable for measuring conductors with hard-to-reach endpoints
- Measure AC/DC voltage up to 600V
- Measure AC current up to 200A
- Measure resistance between 1Ω and 2Ω
- Verify voltage and continuity measurements
- Capable of performing True-RMS measurements for AC voltage and current
- Backlit, digital display
- Can be operated using a single hand
- Supplied test leads are compatible with Fluke’s test clips
- The 4mm SlimReach Probe Tips supplied with this tester are compliant with national electrical standards
- Works with 4/0 wires (120mm²)
- Robust, ergonomic design
- Drop-tested to 3m (10 feet)
- Ideal for commercial and/or light industrial electricians
- Optimised for efficiency, safety and practicality without compromising its accuracy and reliability
- Ideal for troubleshooting and individual circuit verification
*If the user and/or other equipment being used as part of the test are fully isolated from the earth ground a test lead may be required.
What’s Included in the Fluke T6-600 Electrical Tester with FieldSense Technology?
- Fluke T6-1000 Electrical Tester with FieldSense Technology
- Attached Test Leads with Removable SlimReach 4mm Test probe
- User’s Manual / Quick Reference Guide
Fluke 62 MAX+ Infrared Thermometer Description
The Fluke 62 MAX+ Infrared Thermometer can be used to measure temperatures between -30°C and 650°C (-22°F to 1202°F).
Measurements can be viewed via the large, backlit display, making the Fluke 62 MAX+ Infrared Thermometer suitable for use in visually challenging areas.
This instrument can be set to display the minimum, maximum or average temperatures; alternatively, the Fluke 62 MAX+ Infrared Thermometer can be adjusted to indicate the difference between two measured temperatures. This thermometer can also accommodate high and low alarms, allowing the user to quickly and easily see measurements which exceed the upper or lower limits. These functions add to the adaptability of the Fluke 62 MAX+ Infrared Thermometer, allowing the user to tailor it to the application.
In addition to its extensive measurement capabilities and adaptability, the Fluke 62 MAX+ Infrared Thermometer has been optimised for ease-of-use. To this end, it includes dual lasers which work to aid the user in identifying the area to be measured. The measurement area is the spot between the laser dots. This precise laser technology also adds to the accuracy and reliability of this IR thermometer.
Further to this, the Fluke 62 MAX+ Infrared Thermometer’s ergonomic design has been optimised so that it fits into the user’s hand more comfortably. This compact, lightweight product can be attached to a tool loop or belt and fits neatly into a toolbox, ensuring that it is easy to transport this thermometer across and between work sites.
Moreover, the Fluke 62 MAX+ Infrared Thermometer is IP54 rated: it is resistant to dust and water ingress. Additionally, this IR thermometer has been drop-tested to 3m (9.8 feet). Its resilient, rugged design makes the Fluke 62 MAX+ Infrared Thermometer suitable for use in a variety of challenging environments. Please see the video below for an indication of this product's resilience.
The Fluke 62 MAX+ Infrared Thermometer is a compact, easy-to-use, reliable IR thermometer with extensive measurement capabilities. It is suitable for determining whether an electrical panel has a hot spot, a motor is overheating, or an HVAC system is inefficient. Like the included Fluke T6-600 Electrical Tester with FieldSense Technology, it is ideal for conducting measurements in hard-to-reach or hazardous areas.
Fluke 62 MAX+ Infrared Thermometer Key Features
- Measure temperatures between -30°C and 650°C (-22°F to 120°F)
- Large, backlit display
- Can be set to display the minimum, maximum or average temperatures
- Can be adjusted to indicate the difference between two measured temperatures
- High and low alarms can be set to ensure that the user can easily see temperatures that breach either the upper or lower limit
- Dual lasers aid the user with identifying the measurement spot
- Laser technology adds to the accuracy and reliability of this instrument
- Ergonomic design: fits into the user’s hand more comfortably
- Compact and lightweight
- Can be attached to a tool loop or belt
- Fits neatly into a toolbox
- IP54 – resistant against dust and water ingress
- Rugged design – drop tested to 3m (9.8 feet)
- Power using a single, standard AA battery
- A compact, easy-to-use, reliable IR thermometer with extensive measurement capabilities
- Suitable for determining if an electrical panel has a hot spot, a motor is overheating or an HVAC system is inefficient
- Ideal for conducting measurements in hard-to-reach or hazardous areas
Fluke 1 AC-II VoltAlert Voltage Detector Description
The Fluke 1 AC-II VoltAlert Voltage Detector can be used to detect AC voltages between 200 and 1000V.
This instrument is ideal for electricians, maintenance, service and safety personnel as well as homeowners or any individual who requires a non-contact method to test for energised circuits.
The user needs only to touch the tip of the Fluke 1 AC-II VoltAlert Voltage Detector to a terminal strip, outlet or supply cord to determine if an AC voltage is present. If the tip glows red and the detector beeps, then an AC voltage is present.
To ensure that the operator always has piece-of-mind that the unit is operating correctly, the Fluke 1 AC-II VoltAlert Voltage Detector includes Voltbeat™ technology and continually self-tests to ensure that it is always functional.
Further to this, the Fluke 1 AC-II VoltAlert Voltage Detector is rated CAT IV 1000V for added protection and is supplied with a two-year warranty.
The Fluke 1 AC-II VoltAlert Voltage Detector is a simple-to-use, reliable and resilient instrument, ideal for preserving the safety of individuals when working with circuits.
Fluke 1 AC-II VoltAlert Voltage Detector Key Features
- Detect AC voltages between 200 and 1000V
- Ideal for electricians, maintenance, service and safety personnel as well as homeowners
- Provides a non-contact method of testing for energised circuits
- Touch the tip of the detector to a terminal strip, outlet or supply cord to determine if AC voltage is present
- To indicate the presence of an AC voltage the tip of the detector glows red and the instrument beeps
- Includes Voltbeat™ technology
- Continually self-tests to ensure that it is always functioning
- Rated CAT IV 1000V
- Supplied with a two-year warranty
- A simple-to-use, reliable and resilient instrument
- Ideal for preserving the safety of individuals when working with circuits
Fluke C60 Soft Case Description
The Fluke C60 Soft Case can accommodate two test tools as well as test leads and accessories.
It is constructed from durable, long-lasting fabric and includes two padded pockets for two test instruments and a pouch for test leads and/or additional accessories.
The Fluke C60 Soft Case makes transporting test equipment and accessories across and between worksites easy.
Fluke C60 Soft Case Key Features
- Can accommodate two test instrument, test leads and accessories
- Constructed from a durable, long-lasting fabric
- Includes two padded pockets for two test instruments
- Includes a pouch for test leads and accessories
- Makes transporting test equipment and accessories easy
What’s Included in the Fluke T6-600 Electrical Tester, IR Thermometer, 1 AC-II VoltAlert Kit?
- 1x Fluke T6-600 Electrical Tester with FieldSense Technology and Accessories
- 1x Fluke 62 MAX+ Infrared Thermometer
- 1x Fluke 1 AC-II VoltAlert Voltage Detector
- 1x Fluke C60 Soft Case
Fluke T6-600 Electrical Tester, IR Thermometer, 1 AC-II VoltAlert Kit Technical Specifications
Please find the technical specifications available for the products included in this kit.
Fluke T6-600 Electrical Tester with FieldSense Technical Specifications and Comparison Table
The second of Fluke's new electrical testers is the T6-1000, the table below offers some comparisons between the two models.
|
Measurement Specifications |
|||||
| Function | Requires |
T6-600 Range |
T6-1000 Range |
Resolution | Accuracy |
| FieldSense AC Voltage | No | 1-600V | 1-1000V | 1V | ±(3 % + 3 counts) [2] [3] 45 Hz - 66 Hz |
| FieldSense AC Current | No | 0.1-200A | 0.1-200A | 0.1A | ±(3 % + 3 counts) 45 Hz - 66 Hz |
| FieldSense Frequency (Hz) | No | N/A | 45-66 Hz | 1Hz | ±(1 % + 2 counts) [3] |
| Volts AC | Yes | 1-600V | 1-1000V | 1V | ±(1.5 % + 2 counts) 45 Hz - 66 Hz |
| Volts DC | Yes | 1-600V | 1-1000V | 1V | ±(1 % + 2 counts) |
| Resistance |
Yes Yes Yes |
2000 Ω
|
2000 Ω 20.00 kΩ 100.0 kΩ |
1 Ω 0.01 kΩ 0.1 kΩ |
±(1 % + 2 counts) ±(1 % + 2 counts) ±(1 % + 2 counts) |
| Safety (measurement category) | 600 V CAT III | 1000 V CAT III 600 V CAT IV | |||
|
General Specifications |
|||||
| Calibration | 1-year calibration cycle | ||||
| Dimensions | 61.1 mm x 259.3 mm x 43.8 mm | ||||
| Operating Temperature | -10 °C to +50 °C (14 °F to 122 °F) | ||||
| Storage Temperature | -30 °C to +60 °C (-22 °F to +140 °F) | ||||
| Operating Altitude | 2,000 m (6,562 feet) | ||||
| Storage Altitude | 10,000 m (32,808 feet) | ||||
| Relative Humidity |
0 % to 90 %, 5 °C to 30 °C (41 °F to 86 °F) 0 % to 75 %, 30°C to 40 °C (86 °F to 104 °F) 0 % to 45 %, 40°C to 50 °C (104 °F to 122 °F) |
||||
| Battery Type and Life | 2 x AA (IEC LR6); 360 hours continuous, typical; 200 hours using FieldSense | ||||
| Temperature Coefficient | 0.1 x (specified accuracy) / °C for <18°C or >28 °C (< 64.4 °F or > 82.4 °F) | ||||
| Safety | IEC/EN 61010-1, IEC/EN 61010-2-033: Pollution Degree 2 | ||||
| Electromagnetic Environment | IEC/EN 61326-1: Portable | ||||
| Fork Opening | 17.8mm | ||||
| Weight | 0.35 kg (0.78 lb) |
||||
Fluke 62 MAX+ Infrared Thermometer Technical Specifications
| Temperature Range | -30 to 650°C (-22 to 1202°F) |
| Accuracy | ±1.0°C or ±1.0% of reading, whichever is greater -10 to 0°C: ±2.0 -30 to -10°C: ±3.0 |
| Response Time (95%) | <300ms (95% of reading) |
| Spectral Response | 8 to 14 microns |
| Emissivity | 0.10 to 1.00 |
| Fluke 62 MAX+ | 12:1 (calculated at 90% energy) |
| Display Resolution | 0.1°C (0.2°F) |
| Repeatability of Readings | ±0.5% of reading or <±0.5°C (1°F), whichever is greater |
| Power | AA battery |
| Battery Life | 8 hours with laser and backlight on |
| Physical Specifications | |
| Weight | 255g |
| Size | 175 x 85 x 75mm |
| Operating Temperature | 0 to 50°C (32 to 122°F) |
| Storage Temperature | -20 to 60°C (-4 to 140°F) (without battery) |
| Operating Humidity | 10 to 90% RH non-condensing at 30°C (86°F) |
| Operating Altitude | 2000m above mean sea level |
| Storage Altitude | 12000m above mean sea level |
| IP Rating | IP54 per IEC 60529 |
| Drop Test | 3m |
| Vibration and Shock | IEC 68-2-6 2.5g, 10 to 200Hz, IEC 68-2-27, 50g, 11ms |
| EMC | EN 61326-1: 2006 EN 61326-2: 2006 |
| Standards and Agency Approval | Compliance: EN/IEC 61010-1: 2001 Laser Safety: FDA and EN 60825-1 class II |
Fluke 1AC-II VoltAlert Voltage Detector Technical Specifications
| Operating Principle | Senses the steady state electrostatic field produce by AC voltage through insulation without requiring contact to the bare conductor. A red glow at the tip and a beeping noise (if not switched OFF) indicates voltage presence. |
| Voltage Sensing Ranges | 200V AC to 1000V AC 45 to 405Hz; |
| Detector Tip Style | Blade or round, depending on model |
| Light Source | One high-intensity red LED |
| Agency Approvals | c CSA us, CE, C-Tick |
| Safety Rating | CAT IV 1000V |
| IP Rating | IP40 |
| Operating Temperature | -10 to 50°C |
| Operating Humidity Ranges | 0 to 95% (0 to 30°C) 0 to 75% (30 to 40°C) 0 to 45% (40 to 55°C) |
| Operating Altitude | 3000m |
| Batteries | 2 AAA alkaline batteries included |
| SKU | 4910524 |
|---|---|
| Manufacturer Part Code | 4910524 |
