All Fluke Products

Fluke T6-600 Electrical Tester with FieldSense

Reward Points (?)

Logged in, worth £1.22, read more.

£146.40 £122.00
In Stock
Advice & Support
Price Match Request

The Fluke T6-600 Electrical Tester with FieldSense is one of two new additions to the Fluke T- Electrical Tester range and is unlike existing go/no-go non-contact voltage testers as it features new FieldSense technology, putting the user’s safety, accuracy and efficiency at the forefront of its design.For a quick introduction to this product, please see the video below.

The Fluke T6 series of electrical testers are ideal for basic troubleshooting and individual circuit verification, and so features many additional functions not found on Fluke’s T5 electrical testers. Some of the features present on the T6-600 not present on the Fluke T5-600 Electrical Tester are:

  • New FieldSense technology
  • True-RMS
  • Works with 4/0 wires (120mm²)
  • 17.8mm jaw opening
  • Backlit display

This new product has been optimised to be both as ergonomic and safe-to-use as possible. As this product features FieldSense technology, unlike the T5-600, it does not need to be connected to the conductor being tested via test leads* or via metallic contact. This reduces the risk of accidental contact with an energised wire and/or accidental contact with the incorrect conductor. For further information regarding FieldSense please see 'Fluke’s Note on FieldSense Technology’, listed under Technical Specifications.

Furthermore, this product uses FieldSense technology and True-RMS to leadlessly* and accurately detect and measure current and voltage in tight spaces, such as crowded junction boxes, and/or measure the voltage and current of conductors with hard-to-reach end points. The user only need quickly and simply slip the 17.8mm jaw over the conductor to simultaneously measure current and voltage. In addition to measuring AC/DC voltage up to 600V and AC current up to 200A, this product is also capable of verifying voltage and continuity values and measures resistance between 1Ω and 2kΩ.

This product can be operated using a single hand, again increasing its versatility of use and the user’s safety. Furthermore, this product’s simple and convenient design, coupled with its leadless measurement capabilities, reduces testing time and increases the user’s efficiency.  For further information about the T6-600 measuring capabilities as well as information about how to use the Fluke T6-600 Electrical Tester please see the how-to guide listed under Technical Specifications.

 Fluke’s T6-600 Electrical Tester is a portable, robust product capable of withstanding a 3m (10 foot) drop; it comes with test leads compatible with Fluke accessory test clips and detachable 4mm SlimReach probe tips which are compliant with national electrical standards, making this product the perfect addition to a commercial and/or light industrial electrician’s toolbox. 

Fluke T6-600 Electrical Tester with FieldSense Technology Key Features

  • Ergonomic, handheld electrical tester capable of detecting and measuring AC current and AC/DC voltage
  • More accurate and reliable than existing go/no-go non-contact voltage testers
  • Ideal for basic troubleshooting
  • Rapidly checks voltage and current measurements without the need for test leads*
  • Verification of voltage and continuity values
  • Verifies individual circuits
  • New FieldSense technology
  • True-RMS
  • Works with 4/0 wires (120mm²)
  • 17.8mm jaw opening
  • Backlit display
  • Safe, simple, portable design
  • No need for test leads*
  • No need for metallic contact
  • Accurate, simultaneous voltage and current detection and measurement
  • Can measure in tight spaces
  • Can measure conductors with hard-to-reach ends
  • Measures AC/DC voltage between 1 and 600V
  • Measures AC current between 0.1 and 200A
  • Measures resistance to 2kΩ
  • Single hand operating system
  • No need to remove safety covers and/or wire nuts
  • Reduces testing time
  • Increases efficiency
  • Can withstand a 3m (10 foot) fall
  • Comes with test leads compatible with Fluke accessory test clips
  • Comes with detachable 4mm SlimReach probe tips compliant with national electrical standards
  • Ideal for commercial and/or light industrial electricians
  • Hold button freezes the reading

*If the user and/or other equipment being used as part of the test are fully isolated from the earth ground a test lead may be required.

What’s Included?

  • Fluke T6-600 Electrical Tester with FieldSense
  • Attached Test Leads, with Removable SlimReach 4mm Test Probes
  • Users’ Manual/ Quick Reference Guide

Fluke T6-600 Electrical Tester with FieldSense Technical Specifications and Comparison Table

The second of Fluke's new electrical testers is the T6-1000, the table below offers some comparisons between the two models.

Measurement Specifications 

Function Requires 





Resolution Accuracy
FieldSense AC Voltage No 1-600V 1-1000V 1V ±(3 % + 3 counts) [2] [3] 45 Hz - 66 Hz
FieldSense AC Current  No 0.1-200A 0.1-200A 0.1A ±(3 % + 3 counts) 45 Hz - 66 Hz
FieldSense Frequency (Hz) No N/A 45-66 Hz 1Hz ±(1 % + 2 counts) [3]
Volts AC Yes 1-600V 1-1000V 1V ±(1.5 % + 2 counts) 45 Hz - 66 Hz
Volts DC  Yes 1-600V 1-1000V 1V ±(1 % + 2 counts)




2000 Ω



2000 Ω

20.00 kΩ

100.0 kΩ

1 Ω

0.01 kΩ

0.1 kΩ

±(1 % + 2 counts)

±(1 % + 2 counts)

±(1 % + 2 counts)

Safety (measurement category)   600 V CAT III 1000 V CAT III 600 V CAT IV    

General Specifications     

Calibration 1-year calibration cycle   
Dimensions  61.1 mm x 259.3 mm x 43.8 mm    
Operating Temperature  -10 °C to +50 °C (14 °F to 122 °F)
Storage Temperature  -30 °C to +60 °C (-22 °F to +140 °F)
Operating Altitude  2,000 m (6,562 feet)     
Storage Altitude  10,000 m (32,808 feet)     
Relative Humidity 

0 % to 90 %, 5 °C to 30 °C (41 °F to 86 °F)

0 % to 75 %, 30°C to 40 °C (86 °F to 104 °F)

0 % to 45 %, 40°C to 50 °C (104 °F to 122 °F)    

Battery Type and Life  2 x AA (IEC LR6); 360 hours continuous, typical; 200 hours using FieldSense     
Temperature Coefficient   0.1 x (specified accuracy) / °C for <18°C or >28 °C (< 64.4 °F or > 82.4 °F)    
Safety  IEC/EN 61010-1, IEC/EN 61010-2-033: Pollution Degree 2     
Electromagnetic Environment  IEC/EN 61326-1: Portable   
Fork Opening   17.8mm 
Weight  0.35 kg (0.78 lb)    
1 Reviews
Overall Rating

Write a Review

Write Your Own Review
You're reviewing:Fluke T6-600 Electrical Tester with FieldSense
Your Rating
Additional Information
SKU 4910322
Manufacturer Part Code 4910322
Country of Origin China

Subscribe to our Newsletter

International Enquiry