Martindale MARSMKIT10 Smart Meter Kit

This Martindale bundle pack is designed for use by professional electricians or gas engineers involved with the installation of Smart Meters in domestic properties.

With this kit, you'll have everything you need to carry out safe isolation of electrical circuits and to perform wiring checks both before, during and after the installation.

What's Included In the Kit?

• Martindale BZ101 Buzz-It Check Plug Socket Tester
• Martindale TEK101 Non-Contact Volage Indicator w/ Built-In Proving Unit
• Martindale VT7 Single Pole Contact Voltage Tester
• Martindale MTL10 Drummond AC/DC Test Lamp (600V CAT IV)
• Martindale PD440 Proving Unit
• TC70 Combination Soft Carrying Case

About the BZ101 Socket Tester

Plug this socket tester directly into a standard UK 3-pin socket to check internal wiring is correct.

The Buzz-It uses a comination of both LED and audible indicators to alert you to problems with the wiring installation. It can detect a total of 28 different wiring conditions and even functions as a basic fuse finder.

Key features include:

• Compatible with standard UK 13A sockets
• Dual indication - LED lights and audible buzzer
• If there's a problem, no buzzer will sound and LED lights will dim
• Detects 28 different wiring fault conditions
• Functions as a basic fuse finder

About the TEK101 Non-Contact Voltage Detector

Detect the presence of AC voltage on electrical equipment with this handy detector.

If there's voltage present from 180 to 600V AC, the TEK101 will make a sound and light up to alert you.

Key features include:

• Non-contact detection of AC voltage from 180 to 600V
• Audible and visual indicators
• Built-in 50Hz proving unit verifies accurate operation
• Thin tip design for use in confined areas
• Pocket-sized
• CAT IV 1000V rated

About the VT7 Single-Pole Voltage Tester

This voltage tester is made for direct contact and detects AC voltage from 50 to 600V.

If there's voltage present within the system, the VT7's tip will light up. This product is suitable for use both indoors and outdoors and is easy to use when wearing protective gloves.

Also GS38 compliant.

Key features include:

• Audible and visual indication
• AC voltage range of 50V to 600V
• Frequency range of 50-60Hz
• GS38 compliant

About the MTL10 Drummond Lamp

Fully GS38 compliant voltage indicator with range from 50V to 500V AC and 50 to 750V DC.

The MTL10 has special right-angled test probes (also includes straight probes) with finger shield and insulated probe tips (4mm of exposed metal). The probes can be rotated through 90, 180 and 270 degrees and a test lamp is included so you can work in darkened conditions.

Key features include:

• AC/DC voltage indication
• AC range from 60 to 500V
• DC range from 50V to 750V
• GS38 compliant
• Buit-in test lamp
• Probes can be bent to different angles

About the Martindale PD440 Proving Unit

This 440V AC proving unit is used alongside voltage indicators to prove their accuracy before and after testing.

It's ideally suited for testing the Drummond lamp included as part of this kit.

Key features include:

• Range to 440V AC
• For use with standard two-pole voltage indicators
• Also ideal for Drummond/other filament test lamps and standard multimeters

About the TC70 Carrying Case

This uniquely-designed carrying case can house a wide variety of equipment and includes a special pouch where you can house the PD440 proving unit and use it without removing it from the case.