Martindale VT12PD240 Voltage Tester & Proving Unit Basic Kit
Ideal for proving dead 230V single-phase installations, the Martindale VT12PD240 Voltage Tester & Proving Unit Basic Kit includes:
- Martindale VT12 Two-Pole Voltage Tester
- Martindale PD240 240V DC Proving Unit
- Martindale PP100 Multipurpose Pocket Pouch
Martindale VT12 Two-Pole Voltage Tester Overview
A dual-pole voltage & continuity tester, the Martindale VT12 Two-Pole Voltage Tester can detect AC/DC voltages between 12V and 690V. A seven-point LED scale indicates the level of voltage present while a buzzer and LED alert the user when continuity is detected. The Martindale VT12 Two-Pole Voltage Tester will continue to indicate voltage even when its battery is dead; however, an Auto-Power-Off function guarantees a long battery life. In addition to this, the Martindale VT12 Two-Pole Voltage Tester includes several safety features such as removable, GS38 probe caps and a 1.2m double-insulated cable with wear indication.
To continue reading about the Martindale VT12 Two-Pole Voltage Tester, please follow this link.
Martindale PD240 240V DC Proving Unit Overview
Limited to 2mA and capable of producing a 240V DC output, the Martindale PD240 240V DC Proving Unit can be used to prove voltage testers and multimeters with an input impedance greater than 120kΩ. This compact proving unit comes with a belt clip for added convenience.
Read more about the Martindale PD240 240V DC Proving Unit here.
What’s Included?
- Martindale VT12 Two-Pole Voltage Tester
- 2x 1.5V AAA Batteries
- 2x Probe Tip Covers
- Martindale VT12 Instruction Manual
- Martindale PD240 240V DC Proving Unit
- Alkaline PP3/ MIN 1604 9V DC Battery
- Martindale PP100 Multipurpose Pocket Pouch
Martindale VT12 Two-Pole Voltage Tester Technical Specifications
| Voltage Range | 12-690V AC/DC |
| LED Resolution | +/-12, 24, 50, 120, 230, 400, 690V |
| Tolerance | acc. EN 61243 |
| AC/DC Voltage Detection | Automatically |
| Range Detection | Automatically |
| Response Time | <0.1 s |
| Frequency Range | DC, 0 - 65Hz |
| Internal Load | Approx. 2,1 W/690V |
| Test Current | <3.5mA |
| Duration Time | DT=30s |
| Recovery Time | 4min |
| Auto Power-On | >12V AC/DC |
| Frequency Range | 45 - 65Hz |
| Continuity Test | Optical/acoustical |
| Resistance Range | 0-200 kΩ |
| Test Current | 3 μA |
| Overvoltage Protection | 690V AC/DC |
| Power Supply | 2 x 1,5 V IEC LR03/AAA |
| Power Consumption | max. 30 mA/approx. 250 mW |
| Temperature Range | -I0°C - 55°C |
| Humidity | Max 85% rel. H. |
| Height Above Sea Level | Up to 2000 m |
| Measurement CAT | CAT III/690V |
| Pollution Degree | 2 |
| Protection Degree | IP54 |
| Safety Accuracy | EN 61243-3, EN 61010, IEC 61010 |
| Weight | approx. 130g |
| Dimensions | approx. 205 x67 x27mm |
Martindale PD240 240V DC Proving Unit Technical Specifications
| Output Voltage | 240V DC |
| Output Current | 2mA max across 120kΩ 3.5mA max |
| Battery | Alkaline PP3/ MN1604 9V DC (included) Shut-off below 5V |
| Body | Flame retardant ABS |
| Dimensions | 144 x 63 x 31mm |
| Weight | 180g including battery |
| SKU | MARVT12PD240 |
|---|---|
| Manufacturer Part Code | MARVT12PD240 |
