Important Notice
This item is made-to-order exclusively for you once your order is placed. As a result, it is not eligible for cancellation or return under our standard policy. Your statutory rights remain unaffected.
Megger S1 Insulation Resistance Tester, Expert Range (S1-568/2, S1-1068/2 & S1-1568/2)
- 5 kV, 10 kV, or 15 kV
- Up to 8 mA noise rejection
- Measures up to 35 TΩ
- Safety rated up to CAT IV 1000 V to 4000 m
SKU
MEG-S1-EXP
The Megger Expert Range combines advanced diagnostic capabilities, superior noise immunity, and increased performance where other testers may struggle. Three models are available, each with a different maximum test voltage: 5 kV, 10 kV, and 15 kV. The range has a noise rejection of 8, improved software filtering, and is rated for use in environments up to 1000 kV, and delivers a burn/charge current of up to 6 mA.
They include insulation resistance (IR), dielectric absorption ratio (DAR), polarisation index (PI), dielectric discharge (DD), step voltage (SV), and ramp testing. When paired with Meggers PowerDB software, users can perform polarisation/depolarisation current (PDC) analysis and streamline test data reporting. Bluetooth connectivity facilitates wireless data transfer and smooth integration into digital workflows.
All three models also include Meggers' PI Predictor technology, which reduces the time required for polarisation index tests by more than half. The guard terminals minimise the impact of surface leakage currents without sacrificing accuracy, and the unit's ergonomic and rugged design ensures reliability in field conditions where performance is critical.
Product Range
- Megger S1-568/2 Expert Range Insulation Resistance Tester, 5 kV
- Megger S1-1068/2 Expert Range Insulation Resistance Tester, 10 kV
- Megger S1-1568/2 Expert Range Insulation Resistance Tester, 15 kV
Key Features
- RE>Act mode enhanced accuracy and safety
- PI predictor function (PIp)
- PDC test capability
- Up to 8 mA noise rejection with Advanced adaptive filter
- Measures up to 35 TΩ
- Safety rated up to CAT IV 1000 V to 4000 m
- Unique dual-case design - additional user protection
- Operates from battery or AC mains supply
- Compatible with CertSuite Asset
Feature Comparison |
Essential | Advanced | Expert | |
|---|---|---|---|---|
| Test Capability | High Guard Terminal Performance | ■ | ■ | ■ |
| IR | ■ | ■ | ■ | |
| IR(t) | ■ | ■ | ■ | |
| PI Polarisation Index | ■ | ■ | ■ | |
| PI Predictor | ■ | ■ | ■ | |
| DAR Dielectric Absorption Ratio | ■ | ■ | ■ | |
| DD Dielectric Discharge | ■ | ■ | ||
| Ramp Test | ■ | ■ | ||
| RE>Act Mode | ■ | ■ | ■ | |
| PDC Test | ■ | ■ | ||
| Test Voltage | Max. Voltages Available | 5 kV or 10 kV | 5 kV, 10 kV or 15 kV | 5 kV, 10 kV or 15 kV |
| Charging and Burn Mode Current | Default Maximum Current | 3 mA | 3 mA | 6 mA |
| User Selectable Max. Current Values | N/A | 1 mA, 3 mA, 6 mA (6 mA only from mains supply) | 1 mA, 2 mA, 3 mA, 4 mA, 5 mA, 6 mA (6 mA from internal battery and mains supply) | |
| Noise Immunity | Max. Noise Current with Measurement within Accuracy Spec. | 3 mA (LV and MV <45 kV) | 6 mA (HV <230 kV) | 8 mA (EHV <1000 kV) |
| Adaptive Filter | ■ | |||
| Negative Current Handling | ■ | ■ | ■ | |
| Averaging Filter | ■ | |||
| Safety | CAT IV 1000 V | ■ | ■ | |
| CAT IV 600 V | ■ | ■ | ■ | |
| Hazardous Peak Voltage Detection During IR Measurement | ■ | ■ | ■ | |
| Data Storage / Features | On Board - Time Stamped | ■ | ■ | |
| Temperature Value Stored | ■ | ■ | ||
| Humidity Value Stored | ■ | |||
| Communications | Test Result Transfer via Wired USB | ■ | ■ | |
| Test Results Transfer via Wireless Bluetooth LE | ■ | ■ | ||
| Test Result Live Streaming via Wired USB | ■ | ■ | ||
| Test Result Live Streaming via Wireless Bluetooth LE | ■ | ■ | ||
| Remote Control via Wired USB | ■ | |||
| Display | New Custom Colour Display | ■ | ■ | ■ |
| Accessories | Carry All Holdall | ■ | ■ | ■ |
| Deeper Lid Pouch | ■ | ■ | ■ | |
| Software Support | CertSuite Asset Lite FREE | ■ | ■ | |
| CertSuite Asset compatible | ■ | ■ | ||
| Power DB Lite FREE | ■ | ■ | ||
| Power DB Advance or Pro support | ■ | ■ | ||
What's Included?
- Choice of Tester
- Quick Start label
- Power lead
- Screened USB cable with filters
- Remote control indicator beacon
- 5 kV, 3 m x 3, medium insulated clips (S1-568/2 and S1-1068/2 only)
- 10 kV, 3 m x 3, large insulated clips (S1-1068/2 only)
- 15 kV, 3 m x 3, X-large insulated clips (S1-1568/2 only)
£4,125.00
£4,950.00 inc vat
2 Options in Stock:
Available Next Working Day*
60 Day Returns
Technical Information
Specification
| S1-568/2 | S1-1068/2 | S1-1568/2 | |
|---|---|---|---|
| AC Voltage (Auto-Ranging) | 90 – 264 V rms, 50/60 Hz, 100 VA | 90 – 264 V rms, 50/60 Hz, 200 VA | |
| Battery Voltage | 10.8 V, 5.2Ah, 56.16 Wh meets IEC 62133-2:2017 (S1-1568/2 has 2 batteries) | ||
| Battery Life | 6 hours (typical) continuous testing at 5 kV with a 100 MΩ load | 4.5 hours (typical) continuous testing at 10 kV with a 100 MΩ load | 4.5 hours (typical) continuous testing at 15 kV with a 100 MΩ load |
| Auto Power Off | The instrument turns off after a few minutes if not used to conserve battery life | ||
| 30 Min Quick Charge | 1 hour operation at 5 kV with a 100 MΩ load | ||
| Battery Charge Time | 2.5 hours deep discharge 2 hours normal discharge |
||
| Test Voltage | 250 V, 500 V, 1000 V, 2500 V, 5000 V | Above plus 10000 V | Above plus 15000 V, V(Locked) |
| Lock Test Voltage | 40 V to 1 kV in 10 V steps 1 kV to 5 kV in 25 V steps 5 kV to 15 kV in 25 V steps |
||
| Test Voltage Accuracy | +4 %, -0 %, ±10 V nominal test voltage at 1 GΩ load (0 °C to 30 °C) | ||
| Resistance Range | 10 kΩ to 15 TΩ @ 5 kV 10 kΩ to 35 TΩ @ 10 kV 10 kΩ to 35 TΩ @ 15 kV |
||
| Re<Act | Re-absorption current measurement nominal accuracy. Operational up to 30 V externally applied | ||
| Accuracy (23 °C) from 1 MΩ to | 5000 V 2500 V 1000 V 500 V 250 V ±5% to 1 TΩ 500 GΩ 200 GΩ 100 GΩ 50 GΩ ±20% to 10 TΩ 5 TΩ 2 TΩ 1 TΩ 500 GΩ |
10 kV 5000 V 2500 V 1000 V 500 V ±5% to 2 TΩ 1 TΩ 500 GΩ 200 GΩ 100 GΩ ±20% to 20 TΩ 10 TΩ 5 TΩ 2 TΩ 1 TΩ |
15 kV 10 kV 5000 V 2500 V 1000 V ±5% to 3 TΩ 2 TΩ 1 TΩ 500 GΩ 200 GΩ ±20% to 30 TΩ 20 TΩ 10 TΩ 5 TΩ 2 TΩ |
| Guard Terminal Performance | When measuring an insulation resistance of 100 GΩ at 5000 V, the tester can guard out current IG at least 5000 times the insulation test current IL with a maximum additional resistance error of 1% | ||
| Display Range Analogue | 100 kΩ to 10 TΩ | ||
| Display Range Digital | 10 kΩ to 35 TΩ | ||
| Short Circuit / Charge Current | 1 mA, 2 mA, 3 mA, 4 mA, 5 mA, 6 mA (6 mA from internal battery and mains supply) |
||
| Insulation Test Alarm | 100 kΩ to 10 GΩ | ||
| Capacitor Charge (@6 mA) With AC or Battery |
<1.5 s/μF to 5 kV <2.7 s/μF to 10 kV <4 s/μF to 15 kV |
||
| Capacitor Discharge | <120 ms/μF discharge from 5 kV to 50 V | <250 ms/μF to discharge from 10 kV to 50 V | <3500 ms/μF to discharge from 15 kV to 50 V |
| Capacitance Range With the test voltage set above 500 V |
10 nF to 25 μF | 10 nF to 50 μF | |
| Capacitance Measurement Accuracy | 10 nF to 10 μF : ±10% ±5 nF | ||
| Current Range 0.01 mA to 6 mA | 1 mA, 2 mA, 3 mA, 4 mA, 5 mA, 6 mA (6 mA from internal battery and mains supply) |
||
| Current Accuracy | ±5% ±0.2 nA at all voltages (20 °C) | ||
| Interference | 8 mA from 1200 V to 2500 V | 8 mA from 2560 V to 10 kV | 8 mA from 2800 V to 15 kV |
| Software 4 Filter Settings | 10 s, 30 s, 100 s, 200 s | ||
| Voltmeter Range | 30 V to 660 V AC or DC, 45 Hz – 65 Hz | ||
| Voltmeter Accuracy | ±3%, ±3 V | ||
| Timer Range | Up to 99 minutes 59 seconds, 15-second minimum setting | ||
| Memory Capacity | 11 hours logging @ 5-second intervals | ||
| Test Modes | IR, IR(t), DAR, PI, SV, DD, PDC, Ramp test | ||
| Interface | USB type B (device) Bluetooth® Class 2 | ||
| Real Time Output | 1 Hz output readings (V, I, R) | ||
| Remote Control | Remote control via USB cable only (requires RC dongle to be in position) |
||
| Maximum Altitude | 3000 m | 4000 m | |
| Operating Temperature Range | -20 °C to 50 °C | ||
| Storage Temperature Range | -25 °C to 65 °C | ||
| Humidity | 90 % RH non-condensing at 40 °C | ||
| IP Rating | IP65 (lid closed), IP40 (lid open) | ||
| Safety | Meets the requirements of IEC 61010-1 CATIV 600 V to 3000 m (5 kV, 10 kV) CATIV 1000 V to 4000 m (15 kV) |
||
| EMC | Meets the requirements of IEC61326-1 | ||
| Dimensions | 285 mm x 181 mm x 315 mm | 305 mm x 194 mm x 360 mm | |
| Weight | 4.5 kg | 6.5 kg | |
Document Downloads
Megger S1 Expert Range Insulation Resistance Testers Datasheet
Megger S1 Expert Range Insulation Resistance Testers User Manual
Additional Information
SKU
MEG-S1-EXP
Megger S1 Insulation Resistance Tester, Expert Range (S1-568/2, S1-1068/2 & S1-1568/2)
£4,125.00
£4,950.00 inc vat
£4,125.00
£4,950.00 inc vat