Metrel A1532 XA EVSE Adapter

The Metrel A1532 XA EVSE Adapter can be used with compatible Metrel multifunction testers to verify the functionality and electrical safety of electrical vehicle charging stations. It is specifically designed for testing mode 3 EV supply equipment with type 2 connectors.

To this end, the Metrel A1532 XA EVSE Adapter supports the following test features:

• 3-phase load up to 13A (1-phase or 3-phase when testing banana sockets)
• Fault simulation: Diode short, PE-CP short and PE open
• Proximity Pilot resistance selector for simulating EV cable presence and current rating detection
• Control Pilot resistance selector for simulating electrical vehicle status

The Metrel A1532 XA EVSE Adapter also includes support for functional tests as well as 6mA EV RCDs and Metrel’s MESM Software (NOT included) for creating reports. In addition to this, when used with Metrel’s AutoSequences® function, available on select Metrel multifunction testers, the Metrel A1532 XA EVSE Adapter can test EVSE charging stations state-by-state at the push of a button. 

Moreover, the Metrel A1532 XA EVSE Adapter includes voltage indicators for detecting EVSE output and an output BNC connector for CP signal monitoring. It also features:

• Banana socket outputs for connection to a 3-phase installation tester
• A socket output for connection to a 1-phase installation tester (Phase 1, Neutral, PE)
• Type-2 male plug connector for connection to EVSE

The Metrel A1532 XA EVSE Adapter is comprehensive, simple-to-use adapter ideal for on-site testing of EVSE charging stations and initial and periodic testing of private, semi-private and public EVSE charging stations.

Compatible Metrel Multifunction Installation Testers 

Standards

Metrel A1532 XA EVSE Adapter Key Features

• Use with compatible Metrel multifunction testers to verify the functionality and safety of EV charging points
• Specifically designed for testing mode 3 EV supply equipment with type 2 connectors
• 3-phase load up to 13A (1-phase or 3-phase when testing banana sockets)
• Fault simulation: Diode short, PE-CP short and PE open
• Proximity Pilot resistance selector for simulating EV cable presence and current rating detection
• Control Pilot resistance selector for simulating electrical vehicle status
• Supports functional tests
• Supports 6mA EV RCDs
• Supports Metrel’s MESM Software (NOT included): create professional station-based reports
• Supports Metrel’s AutoSequences® function (available on newer Metrel Multifunction testers)
• Test EVSE charging stations state-by-state at the push of a button using the AutoSequences® function
• Voltage indicators for EVSE output
• BNC connector for CP monitoring
• Banana socket outputs for connection to a 3-phase installation tester
• A socket output for connection to a 1-phase installation tester (Phase 1, Neutral, PE)
• Type-2 male plug connector for connection to EVSE
• Ideal for on-site testing of EVSE charging stations
• Suitable for initial and periodic testing of private, semi-private and public EVSE charging stations

What’s Included?

• Metrel A1532 XA EVSE Adapter
• Small, Soft Carrying Bag
• Instruction Manual