Pressure Calibrators & Controllers
You'll find everything you'll need for both measuring pressure and calibrating pressure equipment in this category. Includes pressure calibrators and pressure controllers from Comark, Extech, Sika, Fluke, Testo and GE Druck.
Find out more about Pressure Calibrators & Controllers below.
- Alternative to deadweight testers
- Optimised for calibrating gauges and pressure transmitters
- Unaccredited or accredited models
- 1 x Fluke P5513 Pneumatic Pressure Comparator
- One or three Fluke 2700G Reference Pressure Gauges
- Can be used individually as standard checks and to provide process measurements with datalogging
- 1 x Fluke P5515-140M Hydraulic Pressure Comparator
- One or three Fluke 2700G Reference Pressure Gauges
- Pressure range of up to 10000 psi (700 bar) with full-scale accuracy of 0.02%
- Suitable for calibrating pressure transmitters, transducers and gauges
- Generates, controls and measures pressure up to 2MPa
- Measures current between 4 and 20mA and DC voltage between 0 and 30V
- 1 x Fluke P5510 Pneumatic Pressure Calibrator
- 1 x Fluke P5515 Hydraulic Pressure Comparator
- Four or six Fluke 2700G Reference Pressure Gauges
About Pressure Calibrators & Controllers
High-precision pressure measuring devices capable of verifying (or calibrating) the pressure reading of another pressure measuring instrument. Pressure calibration is the comparison of the output of a device used to measure pressure with that of another pressure measurement device, or pressure measurement standard. This usually involves plumbing the device under test (DUT) to the standard device and generating a common pressure in the measurement circuit.
Pressure devices provide critical process measurement information to process plant control systems. Their performance plays an important role in optimizing the operations of the plant and can help ensure the proper functioning of the plant's safety systems.
For precise control of the pressure in a process chamber, or to control the pressure in your system, electronic (digital) pressure controllers are used. Such a pressure controller regulates a control valve, allowing to increase in the pressure inside the process chamber. To relieve the pressure, traditionally bleed valves are used, continuously venting to the environment.
Digital pressure gauges measure the pressure within a system in a special manner. They convert the pressure to an electronic signal. The gauge shows the pressure using a digital display, furthermore, the signal can be used to control equipment. Digital gauges in comparison with analog ones have a higher accuracy.
In this category, you will find over thirty instruments to befit your requirements.
