All Radiodetection (SPX) Products

Radiodetection LMX100 Portable System with Standard Wheel Set and Mains Lead

SKU
100-10-0150
Rating:
0%
(0)
Reward Points
:
11610
£13,932.00 £11,610.00
Free UK Delivery*
Advice & Support
Price Match Request
Radiodetection LMX100 Portable System
Description

As one of the most affordable GPR utility locating tools in the market today, the LMX100™ completes the locator's toolbox, offering a more complete picture of the underground infrastructure. With a simple, easy-to-use interface it also offers the perfect balance of depth penetration and high resolution for accurate locating.

The LMX® family is a non-destructive Ground Penetrating Radar (GPR) that can locate utilities that cannot be located using traditional methods (e.g. plastic pipes or utilities that contain broken tracer wires).

The Radiodetetcion LMX100™ thinks for you, with all the data collection parameters pre-set so that you can quickly start your survey and know that your data collection is optimized.

No prior settings are required as the LMX systems have an ultrawideband (UWB) antenna allowing it to detect shallow and deep utilities in one pass.

Easily pinpoint the location and depth of a utility with the Locate & Mark mode. It incorporates a back-up feature to enable you to locate targets and mark them on the ground accurately. To locate a feature, roll the system back along the same path until the red vertical line is exactly over the response. You can mark the location of the object on the surface and continue data collection. Quickly display the depth of the feature by adjusting the cross-hair to align with the target.

DynaT (Dynamic Target) enhancement feature optimises views of small, medium, and large targets. These views can be toggled to reveal additional subsurface features, giving you unprecedented insights and target confidence in the field.

DynaQ (Dynamic Quality) technology stacks automatically depending on your survey speed. Stacking increases the depth of penetration by suppressing the background noise. A slower survey speed results in more stacks and faster speeds result in fewer stacks and the operator can always see by a colour-coded indicator the level of stacking applied. The highest data quality can be achieved at a comfortable walking speed.

Utility Locating with LMX GPR

Key Features

  • High visibility touchscreen
  • Lightweight fibreglass cart frame
  • On-site reports
  • Lead acid gel cell battery
  • USB
  • Integrated GPS
  • Built-in Wi-Fi capability
  • GPR sensor

LMX Locates:

  • Metal utilities, including pipes and cables
  • Non-metallic pipes, including PVC and asbestos cement
  • Concrete storm and sewer systems
  • Utilities where installed tracer wiring has failed
  • Underground storage tanks and drainage tiles
  • Septic system components
  • Non-utility structures such as vaults, foundation walls, and concrete pads

Comparison Table

Feature Description LMX100 LMX200
Line Scan Mode
Real-time Locate & Mark Acquire data along a line and view it as a cross-section image
Line Data Playback Save and view any collected line data
Back-up Indicator After acquiring some data on the screen, pull the system backward to pinpoint the target location
Position & Depth Indicator The crosshair on the backup indicator shows the current position and depth
Pop up Info Box Touch and hold the screen to generate a movable depth and position info box
Pause Button In No Save Mode, temporarily stop data collection and resume again without clearing the data from the screen
Drawing Arrows In No Save Mode, draw arrows on the screen to highlight features
GPS Status Indicator Indicates the signal quality of the selected GPS (internal or external)
SplitView During data collection, display LineView and MapView simultaneously to quickly see the positional relationship between targets (external GPS only)
Real-time viewing options in Line Scan
Zoom - Position Vary the length of data displayed on the screen
Zoom - Depth Vary the depth of data displayed on the screen
Colour View data with different color palettes
Filter Filter out flat-lying responses in the data using 5 preset filter levels
Gain Adjust amplification of GPR data to make weaker or deeper targets visible
Soil Cal Calibrate velocity for accurate depth measurements; hyperbola-fitting method or select from available pre-set Soil Cal values
Interpretations Mark subsurface features as a colored dot by touching anywhere on the screen
Flags Mark noteworthy above-ground features with sequentially numbered flags
Grid Scan Mode
On-Site Grid Scan Collect grid data and generate depth slices in the field
Guided Grid Setup Select grid size and resolution
Guided Data Collection on the Display Unit Guides the user through data collection with intuitive visual and audio prompts
Recollect Grid Lines Recollect any grid line if you make a mistake
Collect Partial Grid Lines Stop any grid line early to avoid an obstacle
Skip Grid Lines Skip a grid line with a touch of a button if the line does not need to be collected
Obstacle Avoidance The system guides you through collecting a grid around an obstacle
Depth Slices from Incomplete Grids Generate depth slices with an incomplete grid
Grid Line Playback View previously collected grid lines
SliceView
View Depth Slices Scroll through depths and adjust viewing options
Correlate Depth Slices to Grid Lines View the grid line corresponding to a feature in a depth slice
Depth Slice Indicator Display any grid line and scroll down through the depth slices with the depth slice range indicated on the grid line
LineView Mode View grid line in LineView to add interpretations and adjust viewing options
Additional Features
MapView Graphically view the path travelled by the system, any flags or interpretations added as well as the ability to cycle through processed depth slices (External GPS only)
MapView (Internal GPS) Graphically show collected grid locations and processed depth slices
External GPS Port Option to connect an external GPS for increased positional accuracy
Screenshots Saves the current screen image to a JPG file
DynaQ Dynamic Quality Enhancement - Automatically adjusts data quality based on system speed
DynaT Dynamic Target Enhancement - allows the user to selectively view small, medium, or large subsurface targets for easier viewing and detection
File Management Data is logically organised for review and transfer
Screenshots

SProjects containing Lines, Grids & Screenshots
Data Export
USB Data Transfer One-click data export to a USB drive
Field Interpretations File (.CSV) Positional information for interpretations and flags is automatically exported as a .CSV file
Geotagged Screenshots (.JPG) Exports screenshots as JPG files
KMZ Files Screenshots, survey paths, and field interpretations are automatically exported .KMZ files for viewing on Google Earth
Screenshots Only
Project Files (.GPZ) All data (lines, grids & screenshots) in a project are saved as a .GPZ file
Wi-Fi Mini Reports From the field, email reports containing screenshots and information about the collected data
System Usage Report A PDF report containing usage statistics and system diagnostics
GPR Analysis and Reporting Software
GPR Data Export to optional EKKO_Project™ Core Open project files to organize data files, view data, and generate reports
EKKO_Project GPR Software Bundles Software bundles for added data processing, analysis, and visualisation
GPR System Specifications
Center Frequency (MHz) Center frequency of GPR system 250 250
Weight Lightweight GPR system 22 kg (48 lb) 22 kg (48 lb)
System Size Compact GPR Cart 100 x 70 x 115 cm
(39.4 x 27.6 x 45.3 in)
100 x 70 x 115 cm
(39.4 x 27.6 x 45.3 in)
Max Depth Maximum depth of data collected and displayed on the display unit 8 m (26 ft) 8 m (26 ft)
Tech Specs
GPR Sensor size 630 x410 x230 mm (25 x16 x9 in)
GPR Sensor weight 5 kg (11 lbs)
Display Unit weight 2.83 kg (6.24 lbs)
Screen 8.0″ diagonal, high-visibility touchscreen LCD color display
Adjustable backlighting
1500 NIT and 800:1 contrast ratio
Wireless Integrated modules: Wi-Fi (IEEE 802.11 b,g,n)
GPS/GLONASS
Audio Built-in speaker-85dBA speaker w/volume control
Battery 12 Volt Lead acid gel cell
Battery Capacity: 9.0 Ah
Battery Life: 4-6 hours
Weight: 3.6 kg (7.9 lbs)
Charger Charger with status indicator
Universal AC mains charger input: 100-240V, 1.5A, 50/60Hz
Output: 12 Volts @ 3 Amps
Temperature & Environmental Ruggedized, environmentally sealed unit and connections.
Ingress protection (IP) rating of the Display Unit is IP65 under IEC 60529
Relative Humidity operation (non-condensing): 10-90%
Operating temperature range: -40 to 50℃
Do not use the touchscreen below -20 C
Regulatory Specifications EMC-FCC, IC, ACA, RSM
Safety-TUV, CE
0 Reviews Overall Rating
Write a Review
Write Your Own Review
You're reviewing:Radiodetection LMX100 Portable System with Standard Wheel Set and Mains Lead
Your Rating
Additional Information
SKU 100-10-0150
Manufacturer Part Code 100-10-0150-UK
International Enquiry