Integrated preheating function for a prime flame pattern, which can be used 360° overhead after a short preheating time (approx. 5 seconds). The gas is preheated before ignition to ensure clean combustion in the gaseous state.
The wind-stable flame can be precisely adjusted as required with the aid of the polished fine adjustment valve. High safety due to longer construction with stable positioning on Multigas 300 cartridges.
For soft soldering of copper pipes up to a pipe diameter of 22mm and for hard soldering up to a pipe diameter of 15mm, as well as for heating work or removing paint.
The soldering torch has a tough plastic body including a wide collar, increasing stability on the cartridge. Available with or without Multigas 300 Cylinder.
Rothenberger Rofire 4 Soldering Torch | |
---|---|
Working Area Temperature | 0 - 450 °C |
Connection | Cartridge brazing / 7⁄16" EU |
Burner | Brass / stainless steel |
Handle Burner | Plastic |
Ignition | Manual ignition |
Content with Unit of Measure | 600 ml |
Working Range Diameter Soft Soldering mm | 22 mm |
Working Range Diameter Brazing mm | 15 mm |