Choose a free accessory with a multifunction tester.Shop Now
*** The PACT TOMKAT V2 Pipe and Cable Locator / CAT - Cable Avoidance Tool with Display is a cost-effective alternative to Radiodetection's CAT4 Cable Avoidance Tool with depth indication but without a Strike Alert function***
The PACT TOMKAT V2 Pipe and Cable Locator / CAT - Cable Avoidance Tool with Display is similar to its sister product, the PACT TOMKAT S2 Pipe and Cable Locator – No Display, in that it is able to locate cables and pipes buried to a depth of up to three metres. This model differs in regards to the inclusion of a digital, LED display. Via this display, the user can view a bar indicating the cable's/pipe's location, the selected mode, and the remaining battery life.
Like its sister product, the PACT TOMKAT V2 Pipe and Cable Locator with Display is supplied with eight, fitted AA batteries which supply the instrument with up to fifty hours of power (when the tool is used intermittently). Similarly, it too is constructed from IP54, high-impact ABS and has been CE tested, making the PACT TOMKAT V2 CAT - Cable Avoidance Tool suitable for use in rugged, outdoor environments.
The PACT TOMKAT V2 Pipe and Cable Locator with Display also includes a waterproof speaker that outputs an audible alert when pipes and cables are located. It has a location accuracy of ±10% of the depth and, depending on the selected mode and the condition of the ground, can locate cables and pipes that have buried to a depth of up to three metres. For further information, please see the following table.
Depth of Detection with Good Ground Conditions
(loose and damp)
Depth of Detection with Poor Ground Conditions
(dry and compact)
As indicated in the table above, the PACT TOMKAT V2 CAT is equipped with the following three modes:
In addition to this, the PACT TOMKAT V2 Pipe and Cable Locator includes a sensitivity control that can be used to identify the precise location of buried conductors.
The PACT TOMKAT V2 Pipe and Cable Locator / CAT - Cable Avoidance Tool with Display is a comprehensive, versatile and durable instrument that can be used to locate a variety of buried pipes and cables simply, easily and accurately.
|On/Off Switch||Micro switch|
|Power Mode||Used to locate live cables carrying a detectable signal|
|Radio Mode||Used to locate re-radiated radio signals|
|Generator Mode||Used to locate conductors carrying a signal supplied by the signal generator|
|Sensitivity Control||Used to pinpoint the location of buried conductors|
|Visual Display||A digital LED visual display shows a bar, mode selected & battery condition.|
|Speaker Assembly||An audible signal output via the waterproof speaker assembly|
|Batteries||8 x AA alkaline supplied fitted typical battery life 50 hours intermittent use.|
|Operating Temperature||-20C to + 50C|
|Location Accuracy||+ or – 10% of depth|
|Location Depth (typically)||Power mode 3 meters in good conditions 2 meters in poor conditions|
|Radio mode 2 meters in good conditions 1 meter in poor conditions|
|Generator mode 3 meters in good conditions 2 meters in poor conditions|
|Good Conditions||In P.A.C.T.'s opinion, good conditions imply the ground is loose and damp|
|Poor Conditions||In P.A.C.T.'s opinion, poor conditions imply dry compact ground such as concrete or clay|
|Frequency||Power mode: 50Hz|
|Radio mode: 15-30kHz|
|Generator mode: 33kHz|
|Construction||Moulded from high impact ABS weatherproof to IP54 CE tested|
|Dimensions||730mm x 245mm x 65mm|
We'd really appreciate it if you'd review this product
Why not leave a review of this product? Reviews help us improve our service for customers looking for a product to make a decision.No reviews have been found
Do you have a question or found it cheaper? Contact us