Aim-TTi AC1000A Low Distortion 1kW AC Power Source - UK/Schuko/USA Plug
The Aim-TTi AC1000A Low Distortion 1kW AC Power Source is a pure power source capable of providing up to 1000W at 230V. It can be used with Aim-TTi’s HA1600A Power and Harmonics Analyser to conduct compliance quality measurements according to EN61000-3-2.
To this end, like the Aim-TTi HA1600A Power and Harmonics Analysers, there are three versions of the Aim-TTi AC1000A Low Distortion 1kW AC Power Source available. These models vary regarding their power connector/ plug; please see the table below for further details.
| SKU | Name | Power Connector/ Plug |
| 51160-0200 | Aim-TTi AC1000A Power Source with UK Plug | UK Power Connector |
| 51160-0210 | Aim-TTi AC1000A Power Source with Scuko Plug | Schuko Power Connector |
| 51160-0220 | Aim-TTi AC1000A Power Source with USA Plug | USA Power Connector |
The Aim-TTi AC1000A Low Distortion 1kW AC Power Source provides a solution to maintaining compliance with EN61000-3-2 in situations where the AC power supply is poor or variable. It can also be used to stress test a range of power supply types within electronic equipment.
The Aim-TTi AC1000A Low Distortion 1kW AC Power Source can support a maximum load current of 4.4A RMS and peak currents of up to 10A.
Finally, the Aim-TTi AC1000A Low Distortion 1kW AC Power Source features comprehensive overload protection. It is an economic, innovative, and simple solution to ensuring standard compliance in situations with poor or variable AC power supplies.
Aim-TTi AC1000A Low Distortion 1kW AC Power Source Key Features
- A pure power source capable of providing up to 1000W at 230V
- Use with Aim-TTI’s HA1600A PQA to conduct compliance quality measurements according to EN61000-3-2
- Three versions are available that vary regarding their power connector/ plug
- Ideal for situations where the AC power supply is poor or variable
- Stress test a range of power supply types within electronic equipment
- Maximum load current: 4.4A RMS
- Maximum peak currents: 10A
- Comprehensive overload protection
- An economic, innovative, and simple solution to ensuring standard compliance
What’s Included?
- Aim-TTi AC1000A Low Distortion 1kW AC Power Source
Aim-TTi AC1000A Low Distortion 1kW AC Power Source Technical Specifications
| Input Voltage | 230V AC or 115V AC, 50 or 60Hz to order. Installation Category II. |
| Supply Tolerances | Voltage ± 10%. Frequency ± 1% |
| Output Voltage | Tracks the amplitude of the fundamental of the input voltage. A variable voltage input may be used to adjust the output voltage to within the limits specified by EN61000–3–2 |
| Output Distortion | Dependent on the purity of the input but will generally meet the requirements of EN61000–3–2. |
| Output Current: | Maximum continuous output current is 4·4A (10A peak). |
| Output Power | Maximum output power is input voltage x 4·4 VA |
| Input Connection | IEC connector; front panel switch. |
| Output Connection | U.K., Schuko, or other national outlet sockets. Load power switch can be set to DIRECT or CORRECTED for ‘A–B’ comparisons. |
| Protection | Thermal trip automatically diverts load to a DIRECT connection in the event of thermal overload. |
| Operating Range | +5°C to +35°C at full rated output; 20% to 80% RH (non-condensing). |
| Storage Range | –40°C to +70°C |
| Environmental | Indoor use at altitudes to 2000m, Pollution Degree 2 |
| Safety | Complies with EN61010–1 |
| EMC | Complies with EN61326-1 |
| Size | 357 x 132 x 235mm mm (W x H x D) |
| Weight | 5.5 kg |
| SKU | AC1000A |
|---|
