Aim-TTi PLH120/-P/-P(G) Single 0-120V/0-0.75A - Choice of Port

The PLH120 models achieve an exceptional power density for a linear regulated power supply by offering up to 94 watts from a ¼ rack 3U-sized casing. This gives it an unusually small bench footprint taking up less space on a crowded bench. For rack-mount applications, up to four units can be mounted into a single slot.

Despite their small size and linear regulation, these Aim-TTi models generate relatively little heat through an advanced phase-controlled pre-regulator. This gives it significantly higher energy efficiency than conventional linear regulated designs, mainly when supplying lower voltages. The internal heat sinks use fan-assisted convection cooling to remove the heat with minimal fan noise. For these models the maximum output voltage is 120V and the maximum output current is 0.75A. Three ports are available to choose from, PLH120, PLH120-P, or PLH120-P(G).

Product Range

• Aim-TTi PLH120 Single 0-120V/0-0.75A
• Aim-TTi PLH120-P Single 0-120V/0-0.75A USB/RS232/LAN/ISOL Analog
• Aim-TTi PLH120-P(G) Single 0-120V/0-0.75A USB/RS232/LAN/GPIB

Key Features

• PLH120

• Single output 120V 90W
• Linear regulation - for the best performance
• Ultra-compact design - uses up less space
• True Analogue controls - for ease of use
• S-Lock function - instantly lock settings
• V-Span function - customise the voltage range
• Low current range and current meter averaging
• DC output switches and "view limits" button
• Selectable remote sense terminals

• PLH120-P

• Single output 120V 90W
• Linear regulation - for the best performance
• Ultra-compact design - uses up less space
• True Analogue controls - for ease of use
• S-Lock function - instantly lock settings
• V-Span function - customise the voltage range
• Low current range and current meter averaging
• DC output switches and "view limits" button
• Selectable remote sense terminals
• Full digital remote control and readback
• RS-232, USB, and LAN (Ethernet)
• LAN Interface conforms with LXI standard
• IVI Driver supplied
• Interfaces are opto-isolated from outputs
• Isolated Analogue remote control of V and I
• Front and rear terminals

• PLH120-P(G)

• Single output 120V 90W
• Linear regulation - for the best performance
• Ultra-compact design - uses up less space
• True Analogue controls - for ease of use
• S-Lock function - instantly lock settings
• V-Span function - customise the voltage range
• Low current range and current meter averaging
• DC output switches and "view limits" button
• Selectable remote sense terminals
• Full digital remote control and readback
• RS-232, USB, and LAN (Ethernet)
• LAN Interface conforms with LXI standard
• IVI Driver supplied
• Interfaces are opto-isolated from outputs
• Isolated Analogue remote control of V and I
• Front and rear terminals
• GPIB interface