Chauvin Arnoux CA6513 Megohmmeter Analogue with Rubber Boot & Leads

The Chauvin Arnoux CA6513 Megohmmeter Analogue with Rubber Boot & Leads is a continuity and insulation tester which can test insulation voltage from 500V to 1000V, providing the user with measurement accuracy of 5%. The short circuit current of the device stands at around 6mA. The accuracy for continuity, resistance and voltage tests stands equal to 3% of the full scale. The AC voltage can go from 0 to 600V and the continuity range at -10Ω to +10Ω.

The CA6513 also provides users with automatic absence of voltage verification through a direct measurement. This is then displayed on two colour-marked terminals in a single input. The display on the Chauvin Arnoux CA6513 Megohmmeter Analogue with Rubber Boot & Leads is extremely easy to read, and the logarithmic scale on board this device means insulation measurements are even easier to read than before. 

As a device, this digital resistance meter is extremely portable and durable. It has a surprisingly low weight of 600g and is very compact by design. The megohmmeter boasts a shockproof, non-slip case that means you can take it anywhere you go safely and securely. You will also receive the rubber boot and leads alongside your megohmmeter to begin use straightaway. 

Where safety is concerned, the Chauvin Arnoux CA6513 Megohmmeter Analogue with Rubber Boot & Leads is prepared. It has an automatic system for when you need to discharge a tested current. You can also use the automatic battery test that tells you if there is a sufficient current available to make your measurements valid. For electrical safety, the CA6513 is categorised as a III-2.