Oscilloscope Accessories
Optional software packages for controlling an oscilloscope's functionality/parameters via PC and carrying cases specifically designed for porting equipment from area to area are all available in this category.
Find out more about Oscilloscope Accessories below.

- GPS antenna
- SMA(M), 100cm
- Suitable for the SHA850A Series

- AC-DC adapter
- Suitable for the SHA850A Series

- 2GHz bandwidth
- Male N-to-BNC cable
- 0.7m (27.6 inches) in length

- Passive oscilloscope probe
- Suitable for use with the 350MHz models

- Store and transport
- Portable bag
- Suitable for the SHA850A Series

- Passive oscilloscope probe
- Suitable for use with the 500MHz models

- 4U rack unit
- Compatible with 19" racks
- Suitable for the SDS1000X-E and SDS2000X-E oscilloscope models

- Soft carry case
- Suitable for the SDS2000X, SDS2000X Plus, SDS5000X, SSA3000X, SVA1000X, SSA3000X-R, and SSA3000X Plus models

- Stable and accurate noise source output
- Measure noise figure and gain
- Frequency range of 9 kHz to 7.5 GHz

- DC bias out option
- SMB(F), D12V-32V,0.1V step
- Suitable for the SHA850A Series

- 4U rack unit
- Compatible with 19" racks
- Suitable for the SPC3303C, SPD3303D, SPD3303S, SPD3303X & SPD3303X-E models

- 6U rack unit
- Compatible with 19" racks
- Suitable for the SSA3000X, SSA3000X Plus, and SVA1000X spectrum analyzers

- 3U Height
- Suitable for 19" racks
- Compatible with SDG7000A AWGs, SSG3000X, and SSG5000X generators

- Rechargeable lithium battery
- Suitable for the SHA850A Series

- GPS receiver
- Suitable for the SHA850A Series

- GPS logging
- Requires option SHA850-GPS (sold separately)
- Suitable for the SHA850A Series

- 3U height
- Compatible with 19" racks
- Suitable for Siglent SPS5000X series

- Frequency range of DC to 18 or 26 GHz
- Maximum VSWR of 1.25:1
- Male to Male

- 6U or 7U height
- Compatible with 19" racks
- Suitable for digital oscilloscopes

- Power analysis option
- Compatible with SDS800X HD oscilloscopes
- Power measurements and analysis

- Independent signal source
- Suitable for the SHA850A Series

- Rack mount kit designed for use with Siglents SDS5000X Oscilloscopes
- Compatible with Siglent’s SDS5002X Digital Storage Oscilloscopes
- Suitable for Siglent’s SDS5004X Digital Storage Oscilloscopes

- Power analysis option
- Compatible with SDS1000X HD oscilloscopes
- Power measurements and analysis

- Analog modulation analysis option
- AM/FM/PM
- Suitable for the SHA850A Series
About Oscilloscope Accessories
Oscilloscopes are powerful and flexible test instruments. To further exploit the range of tests available to electrical test engineers, lab technicians, or automotive engineers, there is a whole load of accessories available including probes and probe sets, adapter plugs, break-out adapters, and spare battery packs for hand-held models.
If you need to convert from BNC to a banana plug or measure voltage drops with a current shunt you will find the cable or sensor adapter here at Tester.
You may already have amassed a fine collection of accessories so why not keep them in a purpose-built carrying case? This will keep your meter and accessories together and ensure that you're always ready to go on a job wherever it may be.