Martindale CD1000 Cable Detector Kit
The Martindale CD1000 actually consists of two items – a transmitter and a receiver. The idea behind the device is that the transmitter sends out an electrical pulse down the targeted cable. The receiver is then able to pick up on this travelling signal, decode the information and present the user with analysis of the cable’s path or the location of detected fuses.
It’s also an ideal product for tracing breaks or incorrect installation as the pulse will be able to determine if breaks are detected and relay this information automatically back to the user. The CD1000 is also suitable for use on both live and dead cables without risk of injury to the person using the tester.
The tester is hugely beneficial for anyone either installing cabling or locating problems with cabling, as when in use the tracing capabilities of this cable detection kit allow users to easily track cabling through walls and ceilings. The CD1000 actually can also be used to trace metallic water and heating pipes, making this tester also suitable for use in the HVAC and plumbing fields.
Martindale CD1000 Cable Detector Kit Key Features
- Suitable for use on both live and dead cabling
- No need for using extra instruments
- Uses complex digital coded sensor signal to determine path of signal when returning to receiver
- Both transmitter and receiver include integrated LCD displays
- Transmitter allows user to adjust transmission level and send out transmission
- Receiver includes backlight and shows level of received signal, code of received signal and live voltage indication
- Automatic or manual adjustment of the received signal’s sensitivity
- Mute function
- Auto power down when left idle
- Includes additional torch lamp for working in dark environments
- It’s possible to use more than one transmitter in multiple environments
Full List of Products Included
- Martindale CD1000 Cable Detector (Inc. Receiver and Transmitter)
- Carrying Case
- Set of Test Leads
- Crocodile Clips
- Earthing Rod
- Batteries
- Instructions
Technical Specifications
| Power | |
| Transmitter | Single 9V IEC 6LR61 Battery |
| Receiver | 6 x 1.5V AAA, IEC LR03 Batteries |
| Current Consumption | |
| Transmitter |
31mA Approx minimum 115mA Approx maximum |
| Receiver |
32mA approx minimum 89mA approx maximum |
| Auto Off Time | 10 minutes approx (receiver only) |
| Dimensions | |
| Transmitter | 190 x 89 x 42.5mm |
| Receiver | 241.5 x 78 x 38.5mm |
| Weight | |
| Transmitter |
360g approx (batteries not included) 420g approx (batteries included) |
| Receiver |
280g approx (batteries not included) 350g approx (batteries included) |
| Safety | |
| Transmitter |
Conforms to BS EN61010-1 CAT III 300V Class II Double Insulation Pollution Degree: 2 |
| Receiver |
Conforms to BS EN 61010-1 CAT III 600V Class II Double Insulation Pollution Degree: 2 |
| Test Leads | Conform to BS EN61010-031 CAT III 1000V, 10A |
| EMC | Conforms to BS EN61326 |
| SKU | MARCD1000 |
|---|---|
| Manufacturer Part Code | MARCD1000 |
