All Martindale Products

Martindale HPAT600/2 PAT Tester - MARHPAT600 Kit 1

SKU
MARHPAT600KIT1
Rating:
0%
(0)
Reward Points
:
445
£534.00 £445.00
Free UK Delivery*
Choose a Special Offer
  • PASS The Complete Guide to EET (PAT) Testing Cover
    PASS The Complete Guide to EET (PAT) Testing, 5th Edition
    FREE
    £24.99
  • PASS The Complete Guide to EET (PAT) Testing, 5th Edition SKU: (PASS-PAT-HB)
    FREE
    £24.99
    PASS The Complete Guide to EET (PAT) Testing Cover
Advice & Support
Price Match Request
Free Complete Guide to EET (PAT) Testing
Martindale HPAT600/2 PAT Tester Kit1
PASS PAT Guide

FREE - PASS The Complete Guide to EET (PAT) Testing, 5th Edition

Buy a PAT testing kit and get an updated PAT Testing Guide worth £24.99. This 129 page indepth PAT testing book is a great addition to your kit. View PAT Guide

This special bundle version of the Martindale HPAT600/2 includes essential PAT accessories which will be used commonly when out testing.

Alongside the HPAT600/2 PAT Tester, this kit also includes:

  • CP501 Classic Check Plug
  • NC2 Non-contact Voltage Tester
  • 500 x Passed PAT Testing Labels (LAB1)
  • 100 x Failed PAT Testing Labels (FAIL1)
  • PATREG PAT Register Booklet
  • Rechargeable Batteries
  • 230V Extension Lead Adaptor (EX332)
  • Earth Probe and Crocodile Clip (TL67)
  • Mains Charger (PSUHPAT230)
  • Null Pin On Key Fob (TL178)
  • In-car Charger (PSUHPAT12)
  • Padded Soft Carry Case and Strap (TC88)

About the Martindale HPAT600/2 PAT Tester

Battery-powered and suitable for use with all types of appliance, the HPAT600 is ideal for quick PAT testing checks.

The HPAT600 includes two modes: automatic and manual. In automatic mode, the tester will run through a selected sequence without any interaction, helping to speed up testing. The manual mode can be used for further control over a test and includes a connection diagram and steps must be configured by the user before they are activated.

This tester is fully suitable for use on both 240V and 110V appliances, class I and class II appliances, power leads and includes a special 200mA DC earth bond test function for safely testing IT equipment.

Martindale HPAT600/2 HandyPAT PAT Tester Key Features

  • Selectable insulation test voltages - 500V and 250V
  • Ideal for beginners and PAT professionals
  • Automatic and manual testing procedures
  • Portable, lightweight unit
  • Insulation resistance testing
  • IEC and extension lead testing
  • Earth continuity test
  • Simulated load testing
  • User-selectable pass values
  • IP20 rated
  • Internal memory stores 200 records
  • High-contrast backlit display
  • Dedicated function buttons for pre-programmed test sequences for Class I and Class II appliances and power leads
  • Numerical data and a PASS/ FAIL indication are shown on the display
  • NON-downloadable integrated memory: capacity for 200 records 
  • Mains rechargeable for low running costs

Martindale HPAT600/2 Technical Specifications

Earth Continuity
Test Voltage 4V DC (into open circuit)
Test Current 200mA DC (into short circuit)
Range 0 to 19.99Ω
Resolution 0.01Ω
Accuracy ± (5% of reading + 2 digits)
Fixed Pass Limits  
Lead ≤ 0.10 Ω = PASS
> 0.10Ω ≤ 0.20Ω = NOTE x.xx PASS*
Class I Class I ≤ 0.10 Ω = PASS
> 0.10Ω ≤ 0.20Ω = NOTE x.xx PASS*
Note *Allows user defined pass values to be recorded, eg. for long cord lengths.
User settable limits ≤0.1Ω to ≤0.9Ω in 0.1Ω steps
Insulation
Test Voltage User selectable > 250V DC at 1mA / > 500V DC at 1mA (< 312.5V DC open circuit / < 625V DC open circuit)
Test Current Test current: 1.5mA (into short circuit)
Ranges 2.00MΩ, 20.0MΩ, 200MΩ
Resolution 0.01MΩ
Accuracy <100MΩ ± (5% reading + 2 digits)
>100MΩ ± (10% reading + 2 digits)
Fixed Pass Levels Lead: ≥ 1.0 MΩ
Class I: ≥ 1.0 MΩ
Class II: ≥ 2.0 MΩ
Pass level Lead: ≥ 1.0MΩ, Class I: ≥ 1.0MΩ, Class II: ≥ 2.0MΩ
User Settable PASS level ≥ 0.3MΩ to ≥ 1MΩ in 0.1MΩ steps ≥ 1MΩ to ≥ 10MΩ in 1MΩ steps
Fuse Checks
Test Voltage 4V DC (into open circuit)
Test Current 200mA DC (into short circuit)
Pass Level >2mA
Simulatted Load Test
Test voltage 4V DC (into open circuit)
Test current 200mA DC (into short circuit)
Accuracy ± (5% reading + 2 digits)
Threshold for ‘Simulated Current Hi’ 16A
Memory 200 tests stored for on-screen recall
General
Overload Protection 300V AC/DC
Protection class IP20
Safety Complies to BS EN 61010-1
Temperature Range -10 to 40°C, non-condensing
Batteries 6 x 1.2V AA NiMH rechargeable batteries
1800mAh, or greater
Battery Life Fully charged, minimum 600 complete
tests. The HPAT500 will operate fully from the battery
charger in the event of discharged batteries. Do not
remove batteries.
Auto Shut Down After 10 minutes of inactivity, or when battery low
Battery Charger Input 230V 50Hz
Battery Charger Output 12VDC at 300mA, 5.5 jack x 2.5 bore centre
positive
Dimensions 90 x 210 x 54mm
Weight Approx 700g (including batteries & leads)
Accessories related to this product:
0 Reviews Overall Rating
Write a Review
Write Your Own Review
You're reviewing:Martindale HPAT600/2 PAT Tester - MARHPAT600 Kit 1
Your Rating
Additional Information
SKU MARHPAT600KIT1
Manufacturer Part Code MARHPAT600KIT1/2
Model Ref HPAT 600 PAT KIT
International Enquiry