Choose a free accessory with a multifunction tester.Shop Now
Test that loops are functioning correctly with this loop tester from Robin-Amprobe.
The device carries out completely non-trip loop testing on passive RCDs across ranges of 20, 200 and 2000Ω. It can also check the level of mains voltage before a test, evaluates correct wiring status and can carry out PSC measurements up to 20kA.
This tester is an essential product for ensuring loops function correctly and that circuit breakers, fuses and RCDs engage correctly and stop the flow of electricity when hazards are identified.
This loop tester is also CAT III 300V safety rated.
|Operating Voltage||230Vac, 45Hz ~ 65 Hz||+10% to -15%|
|Loop Impedance 20Ω / 200Ω / 2000Ω||0 ~ 19.99Ω / 199.9Ω / 1999Ω||±(3% rdg + 4 LSD)|
|AC Test Current||25A Nominal at 20Ω|
|AC Test Period)||10ms at 20Ω|
|No Trip Loop Impedance 20Ω / 200Ω||0 ~ 19.99Ω / 199.9Ω
(L – N impedance < 20Ω)
|± (3% rdg + 6 LSD + Noise Margin)|
|PSC Measurement 200A / 2000A / 20kA||0.0 ~ 199.9A / 1999A / 19.9kA||PSC accuracy derived from measured loop
impedance specification and measured
|Voltage Measurement||100Vac ~ 300Vac||± (2% rdg + 4 LSD) @ 50/60Hz|
|Operating Temperature||0°C to +40°C, ≤ 85% RH, no condensation|
|Storage Temperature||-20°C to +60°C, ≤ 90% RH, no condensation (without batteries)|
|Power Supply||1.5V Alkaline Battery (AA Battery) × 8 pcs|
|Dimensions (L x W x H)||189 x 168 x 85 mm (7.43 x 6.65 x 3.35 in)|
|Product Weight||Approx. 1.1kg (2.4 lb) with batteries installed|
We'd really appreciate it if you'd review this product
Why not leave a review of this product? Reviews help us improve our service for customers looking for a product to make a decision.No reviews have been found
Do you have a question or found it cheaper? Contact us