Clamp Adaptors
-
Discontinued
- 2 × 1.5 V button cells
- Protective case
- High performance and simple operation
TCX001-Z -
£77.40 £64.5064 Reward PointsPrice Match GuaranteeP01105103Z
-
£94.80 £79.0079 Reward PointsPrice Match GuaranteeP01105105Z
-
£106.32 £88.60
- Low current measurements up to 100A AC
- High-performance magnetic double-coil
- Protected against voltage surges
88 Reward PointsPrice Match GuaranteeP01105102Z -
£115.20 £96.00
- Made for use with PV100
- Allows measurements of AC/DC
- 0.5 to 40A measurements
96 Reward PointsPrice Match Guarantee396A951 -
£150.00 £125.00
- Flexible probe allows attachment to difficult applications
- Connects to various Fluke meters
- 1.8m cord
125 Reward PointsPrice Match GuaranteeFLUKEI2500-18 -
£150.00 £125.00
- 7.5 mm coil diameter
- Ergonomic design
- 1.8 m (6 ft) cable
125 Reward PointsPrice Match GuaranteeFLUKEI2500-10 -
£206.40 £172.00
- Increase the versatility of your DMM
- Measure up to 400 amps of AC
- Accurate and easy to read
172 Reward PointsPrice Match GuaranteeFLUCMA5 -
£214.68 £178.90
- Accurate readings without breaking the circuit
- Max conductor size 20mm
- CAT III 600V safety rating
178 Reward PointsPrice Match GuaranteeFLUCMA3 -
Discontinued
- Signal Clamp
- Improve accuracy and performance
- Suitable for use with Amprobe's AT-6000
4868033 -
£234.72 £195.60
- AC measurement range: 0.005 A to 100 A
- Two ranges: 5A - 100A
- Clamping Ø / length: 20 mm
195 Reward PointsPrice Match GuaranteeP01120434B -
Call for Pricing
- Works with several Kewtech testers
- Maximum jaw opening of 24mm
- Rated current of 5A AC
KEW8128 -
£280.80 £234.00
- Measures from 0.1mA to 120A AC
- Small 8mm jaw
- Complies to IEC61010-1 CAT. II 100V
234 Reward PointsPrice Match GuaranteeKEWCM12 -
Call for Pricing
- Measure up to 70A AC
- Suitable for leakage and load current measurements
- Works with several Kewtech instruments
ACC8147 -
Discontinued
- Frequency Range 50 Hz…10 kHz
- Jaw Opening Ø 54 mm
- Pollution Degree 2
3026809 -
Call for Pricing
- 40mm jaw opening
- Works with several Kewtech products
- Measure current to 200A AC
KEW8126 -
£298.80 £249.00
- Designed to enhance functions of existing devices
- High basic accuracy of +/-1%
- 1000:1 conversion rate for easy calculations
249 Reward PointsPrice Match Guaranteei800 -
Free UK DeliveryFluke i400S 400A Current Clamp – Choice of Set£310.80 £259.00
- Compact clamp meter with a 400 A AC measurement range
- Max conductor: Ø 32mm
- Safety rating: CAT IV 600V/ CAT III 1000V
259 Reward PointsPrice Match GuaranteeFLUKE-I400S-EL-X -
Free UK DeliveryChauvin Arnoux C103 AC 011200A (1A AC)[L] Current Clamp£312.84 £260.70
- Accurate, ergonomic and easy-to-use
- 1200 A highest primary current
- Symmetrical coil winding technology
260 Reward PointsPrice Match GuaranteeP01120303 -
Free UK DeliveryChauvin Arnoux C102 AC 011200A (1A AC)[F] Current Clamp£315.48 £262.90
- Extremely safe and ergonomic current clamp
- Suitable for use with numerous conductors
- Output signal accuracy of less than 0.5%
262 Reward PointsPrice Match GuaranteeP01120302 -
Free UK DeliveryChauvin Arnoux C100 AC 011200A (1A AC)[F] Current Clamp£320.52 £267.10
- High accuracy current clamp
- Can be connected to a variety of conductors
- Designed with safeguarding in mind
267 Reward PointsPrice Match GuaranteeP01120301 -
Free UK DeliveryFluke EI-162AC Clip-on Current Transformer (Inducing)£326.40 £272.00
- Clip-on current transformer
- Selective and Stakeless testing
- Suitable for use with the Fluke 1623 or 1625
272 Reward PointsPrice Match GuaranteeEI-162AC -
Free UK DeliveryChauvin Arnoux C107 AC 011200A (1V AC)[L] Current Clamp£334.80 £279.00
- Large jaw AC clamp
- Suitable for multimeters, oscilloscopes, etc
- 52mm clamping diameter
279 Reward PointsPrice Match GuaranteeP01120305 -
Free UK DeliveryFluke i410 AC/DC Current Clamp (400 A)£345.60 £288.00
- AC Current Max: 400 amp
- DC Current Max: 400 amp
- Heat-resistant rubber cables
288 Reward PointsPrice Match GuaranteeFLUCMA7
About Clamp Adaptors
The clamp adaptor differs from a normal clamp meter - these instruments are not generally made for reading by themselves but are designed instead to interface with electrical testers such as multimeters to enable them to perform current measurements.
They come in a huge variety of shapes and sizes ranging from ultra-compact for fitting inside electrical cabinets to large sizes for measuring multiple conductors simultaneously or fitting around larger wires. Adaptors can also be made of flexible materials, allowing them to be bent around an application that simply wouldn't be possible when using a clamp meter.
It is important to note that not all clamp adaptors will work with all equipment - please read the description for which tester(s) the clamp you're looking at might be suitable.