Clamp Adaptors
Most commonly used with digital multimeters, clamp adaptors expand the abilities of a DMM to include the ability to test current levels. Wide range of adaptors available for a large selection of multimeters from many manufacturers.
Find out more about Clamp Adaptors below.
Offer
Stock Due : Estimated 1-2 Weeks
£137.90
£165.48 inc. vat
- 7.5 mm coil diameter
- Ergonomic design
- 1.8 m (6 ft) cable
Offer
£141.50
£169.80 inc. vat
- Flexible probe allows attachment to difficult applications
- Connects to various Fluke meters
- 1.8m cord
Offer
Stock Due : Estimated 1-2 Weeks
£146.50
£175.80 inc. vat
- Compatible with Fluke clamp adaptors
- Wireless connectivity
- 65000 record memory storage
Offer
In Stock : Get It Next Working Day*
£187.50
£225.00 inc. vat
- Increase the versatility of your DMM
- Measure up to 400 amps of AC
- Accurate and easy to read
Offer
£195.00
£234.00 inc. vat
- Accurate readings without breaking the circuit
- Max conductor size 20mm
- CAT III 600V safety rating
Offer
In Stock : Get It Next Working Day*
£212.90
£255.48 inc. vat
- AC current measurements from 0.5 to 400A
- Built-in storage allows up to 65000 records to be saved
- Wirelessly connects to Fluke Connect testing tools, smartphones and PC
Offer
£258.50
£310.20 inc. vat
- Compact clamp meter with a 400 A AC measurement range
- Max conductor: Ø 32mm
- Safety rating: CAT IV 600V/ CAT III 1000V
Offer
£272.00
£326.40 inc. vat
- Designed to enhance functions of existing devices
- High basic accuracy of +/-1%
- 1000:1 conversion rate for easy calculations
Offer
£272.00
£326.40 inc. vat
- Clip-on current transformer
- Selective and Stakeless testing
- Suitable for use with the Fluke 1623 or 1625
Offer
In Stock : Get It Next Working Day*
£315.00
£378.00 inc. vat
- 400 Amps AC or DC
- Heat-resistant rubber cables
- Banana plugs
Offer
£319.00
£382.80 inc. vat
- Conductors up to 20m in diameter
- 10 to 100mV ranges
- CAT III 600V safety rated
Offer
In Stock : Get It Next Working Day*
£339.00
£406.80 inc. vat
- Enable current measurements up to 400A AC
- CAT IV 600V and CAT III 1000V safety rated
- Maximum conductor diameter of 32mm
Offer
Stock Due : Estimated 2-3 Weeks
£360.00
£432.00 inc. vat
- Nominal current range 400 A, AC/DC
- Maximum voltage 600 V
- Output cable length 1.6 m
Offer
£375.00
£450.00 inc. vat
- Measures up to 2000A AC
- BNC to Banana adaptor is included
- Max Conductor Diameter: 170mm
Offer
Stock Due : Estimated 2-3 Weeks
£430.00
£516.00 inc. vat
- 19mm diameter jaws
- Measures current to 300A AC and 450A DC
- 30-hour battery life
- 2m cable length
Offer
£443.00
£531.60 inc. vat
- Current from 0.05A to 5A
- Accurate non-intrusive measurements
- Suitable for use with the Fluke 1750 Power Recorder
Offer
£509.00
£610.80 inc. vat
- Clip-on current transformer
- Selective and Stakeless testing
- Suitable for use with the Fluke 1623 or 1625
Offer
£510.00
£612.00 inc. vat
- Measure AC and DC
- 19mm diameter jaws
- Suitable for clamping onto smaller cables/conductors
Offer
£530.00
£636.00 inc. vat
- 2A-400A
- Clip-on current transformer
- Suitable for use with the Fluke 1750
Offer
£545.00
£654.00 inc. vat
- Measures up to 600 amps AC and 1000 amps DC
- Heat-resistant rubber cables
- Shrouded banana plugs
Offer
In Stock : Get It Next Working Day*
£560.00
£672.00 inc. vat
- 1A to 600A of AC voltage
- 1A to 1000A of DC voltage
- Frequency range of 45Hz to 2kHz
Offer
In Stock : Get It Next Working Day*
£599.00
£718.80 inc. vat
- Measure harmonics and waveforms
- 100mA and 1000 A RMS
- Passive filter
Offer
Stock Due : Estimated 1-2 Weeks
£619.00
£742.80 inc. vat
- Flexible cable
- Measure current without breaking a circuit
- 30A, 300A and 3000A measurement ranges
Offer
£629.00
£754.80 inc. vat
- Thin flex
- High quality
- Flexible current probe
About Clamp Adaptors
The clamp adaptor differs from a normal clamp meter - these instruments are not generally made for reading by themselves but are designed instead to interface with electrical testers such as multimeters to enable them to perform current measurements.
They come in a huge variety of shapes and sizes ranging from ultra-compact for fitting inside electrical cabinets to large sizes for measuring multiple conductors simultaneously or fitting around larger wires. Adaptors can also be made of flexible materials, allowing them to be bent around an application that simply wouldn't be possible when using a clamp meter.
It is important to note that not all clamp adaptors will work with all equipment - please read the description for which tester(s) the clamp you're looking at might be suitable.
