NHS & Schools: COVID-19 Product Discount
All P.A.C.T. Products

PACT SIGEN 2+ Signal Transmitter / Genny Builder’s Kit

SKU
GB2018BK
Rating:
0%
(0)
Reward Points (?)

Logged in, worth £10.76, read more.

:
1076
£645.80 £538.17
Only 1 in Stock Free UK Delivery* Delivery Options

UK - Zone 1 Orders

England, Wales & most of Scotland.

Free 3-5 Working Day1
Orders Over £99 & Selected Items

Economy 2-3 Working Day1
From £1.95

Tracked 2-3 Working Day
£4.95

Express Next Working Day
£7.95

Priority Next Working Day
£14.95 (Pre-Noon)
£19.95 (Pre-10:30am)

Saturday & Sunday
£14.95 (Pre-Noon)

UK - Zone 2 Orders

Highlands, Islands & Northern Ireland.

Free 3-5 Working Day1
Selected Items (Calculated at Checkout)

Economy 2-3 Working Day2
From £1.95

Tracked 2-3 Working Day
£9.95

International Orders

Delivery is calculated at checkout.


Note: Next day delivery is not guaranteed for orders placed after 3:00pm. Prices Ex VAT.

1, 2 See delivery page for more details.

Advice & Support
Price Match Request

The PACT SIGEN 2+ Signal Transmitter / Genny Builder's Kit consists of the PACT SIGEN 2+ Signal Transmitter / Genny, a Carry Bag, a 100mm Signal Clamp, and a 5-metre Sonde (33kHz). There are four P.A.C.T. SIGEN 2+ Signal Transmitter Kits available; for an overview of the products included in these kits please see the ‘Available Kits’ section.

Please see the descriptions below for further information regarding the items included in the PACT SIGEN 2+ Signal Transmitter / Genny Builder's Kit.

PACT SIGEN 2+ Signal Transmitter / Genny Description

The PACT SIGEN 2+ Signal Transmitter / Genny can be used with PACT’s S2 and V2 Pipe and Cable Locators / CAT - Cable Avoidance Tool, or another cable locator capable of receiving 33kHz signals, to located buried services. This reduces strike rates and allows builders to conduct construction and maintenance work safely, effectively and, subsequently, more efficiently.

The PACT SIGEN 2+ Signal Transmitter’s high-impact ABS construction and IP54 rating make it suitable for use on rugged, outdoor building sites. Furthermore, this genny is CE tested.

The PACT SIGEN 2+ Genny features two modes of operation, Induction and Connection; it also includes high- and low- volume and power outputs allowing the user to tailor the PACT SIGEN 2+ Signal Transmitter to suit the application. When set to issue a high-power output the P.A.C.T. SIGEN 2+ Signal Transmitter can determine a familiar and continuous tone. The PACT SIGEN 2+ Signal Transmitter / Genny features an easy-to-use switch for changing between high- and low-power outputs.

In addition to this, the PACT SIGEN 2+ Signal Transmitter’s high-volume output facilitates the user’s ability to establish a better connection tone; whilst its low-volume output makes the PACT SIGEN 2+ Signal Transmitter / Genny suitable for use in quiet locations.

Also expanding the PACT SIGEN 2+ Signal Transmitter’s scope-for-use is its isolated transformer which allows it to be connected to a mains supply (max mains rating: 230V AC) via a 3-pin plug connector.

Furthermore, the PACT SIGEN 2+ Signal Transmitter is supplied with an earth stake and connection leads, as well as a manufacturer’s calibration to ensure reliability and functionality.

The PACT SIGEN 2+ Signal Transmitter also includes eight fitted AA batteries capable of supplying the instrument with up to forty hours of continuous power. The absence of an audible tone indicates that the batteries require replacing.

The PACT SIGEN 2+ Signal Transmitter is a practical, precise and adaptable genny suitable for locating, tracing and avoiding buried cables and pipes on building sites.

PACT SIGEN 2+ Signal Transmitter / Genny Key Features

  • Use with PACT’s S2 or V2 Pipe and Cable Locator / CAT to locate and avoid buried services
  • Also suitable for use with cable locators capable of receiving 33kHz signals
  • Reduces strike rates
  • Allows builders to carry out construction and maintenance work safely, effectively and efficiently
  • High-impact ABS construction
  • IP54
  • CE tested
  • Suitable for use on rugged, outdoor building sites
  • Two modes of operation: Induction and Connection
  • High- and low-volume outputs
  • High- and low-power outputs
  • High-power output allows the user to determine a familiar, continuous tone
  • Easy-to-use switch for changing between low- and high-power outputs
  • High-volume output for establishing a better connection tone
  • Low-volume output makes the transmitter suitable for use in quiet locations
  • Includes an isolated transformer that allows the transmitter to be connected to a mains supply (max mains rating: 230V AC) via a 3-pin plug connector
  • Supplied with an earth stake
  • Supplied with connection leads
  • Supplied with a manufacturer’s calibration
  • Fitted with eight AA batteries capable of supplying the instrument with up to forty hours of power
  • The absence of an audible tone indicates that the batteries require replacing
  • Practical, precise and adaptable genny
  • Suitable for locating, tracing and avoiding buried cables and pipes on building sites

PACT 100mm Signal Clamp Description

The PACT 100mm Signal Clamp allows the user to apply a signal directly to the cable-under-investigation. When used with PACT’s SIGEN 2+ Signal Transmitter / Genny and one of PACT’s S2 or V2 TOMKAT Pipe and Cable Locators / CAT - Cable Avoidance Tool, the PACT 100mm Signal Clamp is able to detect and trace buried insulated cables, such as those used by street lamps.

The PACT 100mm Signal Clamp is operated using the following method:

1.)    Plug the signal clamp’s plug into the SIGEN 2+’s connection socket, found in its accessory compartment

2.)    Place the clamp’s jaws around the cable-under-investigation, ensuring that the jaws are completely shut

3.)    Turn on the SIGEN 2+

4.)    Set the PACT TOMKAT Pipe and Cable Locator to Genny (Generator) mode

5.)    Trace the cable

The wide, 100mm diameter of the P.A.C.T. Signal Clamp ensures that good contact is made with the conductor, without having to remove the cable’s insulation. In this way, a signal can be applied directly to the cable.

The PACT 100mm Signal Clamp is a simple-to-use instrument suitable for safely expanding the PACT SIGEN 2+’s and TOMKAT’s scope-for-use.

PACT 100mm Signal Clamp Key Features

  • Apply a signal directly to the cable-to-be-traced
  • Use with the PACT SIGEN 2+ and one of PACT’s TOMKAT Pipe and Cable Locators / CATs to detect and trace buried insulated cables
  • Suitable for finding and following insulated cables such as those used by street lamps
  • The wide, 100mm diameter ensures that a good contact is made with the conductor without having to remove the cable’s insulation
  • Simple-to-use
  • Suitable for safely expanding the P.A.C.T. SIGEN 2+’s and TOMKAT’s scopes-for-use

PACT 5-metre Sonde (33kHz) Description

The PACT 5-metre Sonde (33kHz) is a small, self-contained, battery operated and waterproof tool. It is designed to be attached to drain rods and similar movable tools optimised for use inside non-metallic pipes.

PACT 5-metre Sonde (33kHz) Key Features

  • Small
  • Self-contained
  • Battery operated
  • Waterproof
  • Designed to be attached to drain rods and similar movable tools used inside non-metallic pipes

What’s Included?

  • PACT SIGEN 2+ Signal Transmitter / Genny
  • Earth Stake
  • Connection Leads
  • Manufacturer’s Calibration
  • 8x AA Batteries – Fitted
  • Carry Bag
  • 100mm Signal Clamp
  • 5-metre Sonde (33kHz)

Available Kits

There are four P.A.C.T. SIGEN 2+ Signal Transmitter Kits available; please see the table below for a quick overview of the items included in each kit.

Kit P.A.C.T. Products
PACT SIGEN 2+ Signal Transmitter  Manufacturer's Calibration 8x AA Batteries - Fitted Earth Stake Connection Lead Set Carry Bag 3-Pin Plug Connector 100mm Signal Clamp 5m Sonde (33kHz)
PACT SIGEN 2+ Signal Transmitter Standard Kit X X X X X X
PACT SIGEN 2+ Signal Transmitter Electrician’s Kit X X X X X X X X
PACT SIGEN 2+ Signal Transmitter Drain Kit X X X X X X X
PACT SIGEN 2+ Signal Transmitter Builder's Kit X X X X X X X X
Part CodeGB/2018/BK

P.A.C.T. SIGEN 2+ Signal Transmitter Technical Specifications 

Off Transmitter is turned off in this position
Induction Mode 33 kHz continuous
Connection Mode 33 kHz continuous
Protection Isolation transformer allows direct connection via a 3 pin plug connector to mains supply (mains rating is 230 VAC maximum)
Power Output low output 0.25-watt high output 1.0 watt
Audio Induction Mode Audible continuous
Audio Connection Mode Audible continuous tone with distinct tone change confirms a good connection is made
Audio On/Off No tone indicates battery replacement required
Batteries 8 x AA alkaline supplied fitted typical battery life 40 hours continuous use
Operating Temperature -20C to + 50C
Compatibility Will work with all locators receiving a 33kHz signal
Accessories Supplied with earth stake & connection leads
Construction Moulded from high impact ABS weatherproof to IP54 CE tested
Dimensions 285mm x 185mm x 195mm
Shipping Box Size 305mm x 205mm x 215mm
Weight 2.5kg
0 Reviews Overall Rating

Write a Review

Write Your Own Review
You're reviewing:PACT SIGEN 2+ Signal Transmitter / Genny Builder’s Kit
Your Rating

Subscribe to our Newsletter

International Enquiry