Megger MFT1735-BS Bluetooth Multifunction Tester w/ Earth Spike Set
Megger MFT1735-BS Bluetooth Multifunction Tester with Earth Spike Set
Ideal for domestic, industrial and commercial fixed wiring low voltage electrical installations, the next-generation Megger MFT1735 improves upon the functionality of the Megger 1700 series to deliver one of Megger's most intuitive multifunction testers yet.
Packed full of all the tests professional installers need on a daily basis, this comprehensive installation tester makes it easy to carry out documentation and certification on any electrical installation. A huge range of tests can be performed with the MFT1735, including system voltage and frequency measurements, insulation testing, continuity testing, resistance testing, loop testing, prospective fault current measurements and RCD testing.
New functions of the MFT1735 include two and three-wire non-trip loop test technology for RCD protected circuits, comprehensive testing of RCDs (including type B) and clamp-on earth testing (2-pole, 3-pole, ART and stake-less techniques). An earth spike kit with leads is supplied as standard with the package.
The functions of the MFT1735 don't stop there - this intuitive multifunction tester also has comprehensive memory for storage of testing results and has Bluetooth technology to make downloading of data from the MFT as simple as possible.
Key Features
- Megger's next-generation MFT - improves upon the reliable MFT1700 range in every way
- Rugged, extremely durable design - over-moulded casing, IP54 protection and EN61010 CAT IV safety rated
- Input protection against accidental misuse and voltage transients
- System voltage and true RMS frequency measurements
- Insulation testing at 100V, 250V, 500V and 1000V
- Continuity resistance testing at 200mA or 15mA - automatic activation
- Resistance measurement range up to 100kΩ with continuity buzzer and selectable thresholds
- Earth loop test, 2 and 3 wire non-trip range and 2 wire Hi current including phase to phase
- Prospective fault current measurements up to 20kA
- RCD testing - type AC, A, S, B and programmable RCDs, 3-phase RCDs, fast ramp test, autotest routine and fault (touch) voltage display
- Earth testing - 2-pole, 3-pole, ART and stake-less
- Visible and audible safety warnings
- Bluetooth technology and extensive memory
What Accessories Come with the MFT1735-BS Earth Spike Kit
- Megger MFT1735-BS Multifunction Tester
- Printed Quickstart Guide
- Full User Guide On CD
- Switched Probe SP5
- Neck Strap - Megger Embroidered
- 3-Wire Leadset with Prods and Clips
- UK Mains Lead SIA10
- Battery Charger
- Earth Spike Test Kit
Accessories
Please find below a table of accessories available for the Megger MFT1735-BS Bluetooth Multifunction Tester. For further information, or to add an item listed below to an order, please contact our sales team.
| Our SKU | Megger's Part Number | Product |
| 1006-408 | 1006-408 | Test & Carry Pouch MFT1700 Series |
| 1005-135 | 1005-135 | Test Lead Set Silicon Red/Green/Blue Unfused |
| ICLAMP | 1001-012 | ICLAMP 1000A AC Current Clamp |
| 1001-811 | 1001-810 | Earth Test Spike Kit |
| 2007-998 | 2007-998 | XTL50 Extended Test Lead (50 m) |
| 2007-997 | 2007-997 | XTL30 Extended Test Lead (30 m) |
| 2001-649 | 1004-319 | Blow Moulded Case MFT1700/MFT1800 Series |
| MEMGMTA4 | 1004-326 | Instrument/Document Carry Case |
| 1002-735 | 1002-735 | Battery NiMH (X6) - MFT17/18 |
| MEGMTA33 | 1002-736 | Charger Power Supply - MFT1700/1800 Series |
| 2001-509 | 1007-161 | Carry Strap MFT1700/1800 Series |
| 1007-463 | 1007-463 | Large Soft Carry Case for all MFTs |
| 1001-975 | 1001-975B | Test Lead Set Red/Blue/Green Fused F10A 50kA (Boxed) |
| 1001-977 | 1001-977B | Fused 10A test lead set (Red/Green) with Prods and clips right angle plugs F10A 50kA (Boxed) |
| MEGMTA1 | 1001-991B | Test Lead Red/Green/Blue Unfused Red/Blue Lg Tip (Boxed) |
| MEGITA1 | 1002-001B | Test lead Set - Comprising Two Unfused Leads (Red/Black) with right angle plugs, Long & Short prods & croc clips (Boxed) |
| MEGRCDA4 | 1002-015B | Fused Test Lead Set Red/Black Red FF500mA 50kA (Boxed) |
| 1002-490 | 1002-490B | Red, Blue and Green Probes & Clips (MFT/LOOP) (Boxed) |
| 1001-976 | 1003-132B | Test Lead Set Red/Green Unfused (Boxed) |
| 6220-810 | 1004-323B | SIA10 Socket Interface Adaptor UK to 3 Leads x 4mm (Boxed) |
| 1002-774 | 1007-157B | Remote Switched probe SP5 CAT IV 600 (Boxed) |
| 2001-509 | 1007-161B | Carry Strap MFT1700/1800 Series Accessory (Boxed) |
Megger MFT1735-BS Technical Specifications
| Insulation Test | |
| Output Voltage | -0% + 20% at rated load or less |
| Voltage Display | ±3% ±3 digits ±0.5% of rated voltage |
| Short Circuit Current | 1.5mA nominal test current |
| Test Current On Load | 1mA at min pass values of insulation |
| Insulation Measurement Accuracy | |
| 1000V | 10kΩ - 999MΩ: ±3% ± 2 digits 10kΩ - 500MΩ: ±3% ± 2 digits >500MΩ: ±10% ± 4 digits |
| 250V | 10kΩ - 250MΩ: ±3% ± 2 digits >250MΩ: ±10% ± 4 digits |
| 100V | 10kΩ - 100MΩ: ±3% ± 2 digits >100MΩ: ±10% ± 4 digits |
| Continuity/Resistance | |
| Range/Accuracy | 0.01Ω - 99.9Ω: ±2% ± 2 digits 100Ω - 99.9kΩ: ±5% ± 2 digits |
| Open Circuit Voltage | 5V ± 1V |
| Test Current (0-2Ω) | 205mA ± 5mA 15mA ± 5mA (user-selectable) |
| Loop Test | |
| Live To Earth Supply | 48V - 280V (45Hz - 65Hz) |
| Live To Live Supply | 48V - 500V (45Hz - 65Hz) |
| L-N/L-L Tests | ±5% ± 3 digits |
| L-E Testing | 0.1 - 39.9Ω: ±5% ± 5 digits ± noise margin 40Ω - 999Ω: ±10% ± 5 digits |
| Display Range | 0.01Ω - 999Ω |
| Live To Earth PFC Range | 20kA |
| Live To Live PSCC Range | 20kA |
| RCD Tests | |
| Supply Up To 100mA | 48V - 480V (45Hz - 65Hz) |
| Supply Up To 1A | 48V - 280V |
| RCD Types | Type AC, A, S Type B (Pure DC) |
| No Trip Test (1/2xI) | -10% - 0% |
| Trip Test (1 x I and 5 x I) | +0% - +10% |
| Ramp Test Touch Voltage (0-253V) | ±5% ±15% ±0.5v |
| Trip Time | ±1% ±1ms |
| Trip Current | ±3% |
| Step Increments VAR (Variable RCD Selection) |
10mA - 50mA (1mA Steps) 50mA - 500mA (5mA Steps) 500mA - 1000mA (10mA steps) |
| Supply Measurements | |
| Voltage | 10V - 600V (15 - 400Hz) True RMS ±3% ± 1V ± 2 digits |
| Phase Rotation Indication | L1-L2-L3 & L1-L3-L2 |
| Frequency | 15Hz - 99Hz: ±0.5% ± 1 digit 100Hz - 400Hz: ± 2.0% ± 2 digits |
| Frequency Resolution | 0.1Hz |
| Power | |
| Supply Type | 1.2V NiMH (6 x rechargeable cells supplied) Mains charger for on-board recharging (4 hours typical) 12V car charger (cigar lighter lead - optional) |
| Earth Test | |
| Resolution | 0.01Ω |
| Current | 0.45mA or 4.5mA |
| Noise Rejection | 20V pk/pk (7V RMS) |
| Max Probe Resistance (Rp & Rc) | 100kΩ @ 50V 5kΩ @ 25V |
| 2 & 3 Pole Method (0.01Ω - 1.999kΩ) | ±2.0% ± 3 digits |
| ART Method (1.00Ω - 1.999kΩ) | ±5.0% ± 3 digits |
| Stakeless Method (1.00Ω - 199Ω) | ±7.0% ± 3 digits |
| Current (Via Optional Clamp Meter) | |
| Range | 0.1mA to 200A AC |
| Resolution | 0.1mA |
| Accuracy | ±5.0% ± 3 digits |
| mV Sensor Input | |
| Range | 0.0mV to ± 199.9mV DC |
| Resolution | 0.1mV |
| Accuracy | ±1.0% ± 2 digits |
| Internal Memory | |
| Capacity | 1000 results |
| Communication | Bluetooth |
| Design Standards | |
| Safety | IEC 61010-1: 2010 IEC 61010-30: 2010 IEC 61010-031: 2008 600V CAT III / 300V CAT IV (Max Phase to Phase 600V) IEC 61557:2007 Parts 1 to 10 |
| EMC | |
| Classification | IEC61326 edition 2 location class B |
| Environmental | |
| Temperature (Operational) | -10 to 55°C |
| Temperature (Storage) | -25 to 70°C |
| Operating Humidity | 90% RH at 40°C max |
| Max Altitude | 2000m |
| Weight | 1kg (with batteries, excluding case) |
| Dimensions | 150mm H x 85mm W x 23mm D |
| Calibration Temperature | +20°C |
| Temperature Effects | |
| Temperature Coefficient | <0.1% per °C |
Accessories related to this product:
People Also Bought
1 Reviews
Overall Rating
Additional Information
| SKU | 1003-319 |
|---|---|
| Manufacturer Part Code | 1003-319 |
| Country of Origin | United Kingdom |
