Force Accessories

Calibration and adjustment plate (hardness test blocks) with defined and tested steel hardness for regular testing and adjustment of hardness testing devices. 38-43 HRC. Suitable for Sauter HO Hardness Testers.

Calibration and adjustment plate (hardness test blocks) with defined and tested steel hardness for regular testing and adjustment of hardness testing devices. 48-53 HRC. Suitable for Sauter HO Hardness Testers.

Calibration and adjustment plate (hardness test blocks) with defined and tested steel hardness for regular testing and adjustment of hardness testing devices. 58-63 HRC. Suitable for Sauter HO Hardness Testers.

External impact sensor Type DC. Short impact sensor for tests in holes or hollowed objects.

Plastic Transport Case for Sauter HO Hardness Testers (W 390mm x D 310mm x 120mm).

• Roller tension clamps
• Suitable for belts, ropes, wires, etc
• Ranges available from <=1kN to <=10kN

• Nominal sensitivity: 3 mV/V
• CE and RoHS-compliant
• Nickel-plated steel

External impact sensor Type C, Low energy sensor: requires only 25 % impact energy compared to type D.

External impact sensor.

External impact sensor Type D+15. Slim front section for holes, grooves or re-entrant surfaces.

• Nominal sensitivity: 3 mV/V
• CE and RoHS-compliant
• Nickel-plated steel

• Display unit
• Automated measurement process
• Suitable for use with the Sauter HO motorised probe

• Nominal sensitivity: 3 mV/V
• CE and RoHS-compliant
• Stainless steel

• Pulling force testing
• Models available are <=20kN or <=50kN
• Accommodates test objects up to 80mm wide

• Nominal sensitivity: 3 mV/V
• CE and RoHS-compliant
• Stainless steel

External impact sensor Type DL, for very narrow surfaces

External impact sensor Type G. High energy sensor: 900 % impact energy compared to type D.

• Tensile force testing
• Builds up tensile force automatically
• Ranges available from <=5kN to <=50kN

Test bench for round, flat objects for use with these motorised probes: HO-A15 to -A18

• Threaded hole M6
• External thread M12
• Interchangeable radii rollers

• Bending device
• Interchangeable radii rollers
• Anodised aluminium (<=2.5kN) or steel (<=10kN)

• Bending device
• Permanently fixed radii
• Anodised aluminium (<=2.5kN) or steel (<=10kN)

UCI-Sonde for HV 1. Suitable for Sauter HO Hardness Testers.

UCI-Sonde for HV 2. Suitable for Sauter HO Hardness Testers.