Fluke 87V MAX TRMS Digital Multimeter E2 Combo Kit

The Fluke 87V MAX TRMS Digital Multimeter E2 Combo Kit is ideal for industrial and facilities maintenance electricians working in outdoor, wet, dusty and/or hazardous locations. It includes the following Fluke products:

• Fluke 87V MAX TRMS Digital Multimeter
• Fluke C115 Soft Carrying Case
• Fluke ToolPak™ Magnetic Meter Hanging Kit
• Fluke TL224 SureGrip™ Insulated Test Leads
• Fluke AC220 SureGrip™ Alligator Clips
• Fluke TL238 SureGrip™ Test Probes
• Fluke 80BK-A DMM Temperature Probe

For further information regarding these products, please see the following descriptions.

Fluke 87V MAX TRMS Digital Multimeter Description

Rugged, dustproof, waterproof and equipped with a complete selection of electrical tests, the Fluke 87V MAX TRMS Digital Multimeter is ideal for on-site troubleshooting applications in outdoor, dark, wet, dusty and/or hazardous environments. As such the Fluke 87V MAX TRMS Digital Multimeter is ideal for industrial and facilities electricians working in the following locations:

• Cement plants
• Electrical utilities 
• Food processing facilities
• Chemical processing facilities
• Steel mills
• Foundries
• Mines (MHSA approval pending)
• Military sites
• Petrochemical sites

Rugged and Practical Design

Housed in an industrial-strength, sealed and IP67-rated casing and holster, the Fluke 87V MAX TRMS Digital Multimeter will remain functional in areas where other digital multimeters would fail. It is dustproof, waterproof and has been drop-tested from 4m (with holster) making it suitable for use in rugged environments and/or areas with high dust concentrations and/or high levels of humidity or rainfall. Additionally, the Fluke 87V MAX TRMS Digital Multimeter’s holster is reversible ensuring that it is also protected when it is not in use.

Moreover, the Fluke 87V MAX TRMS Digital Multimeter has a safety rating of CAT IV 600V/ CAT III 1000V and is protected against 8000V spikes caused by load switching and faults on industrial circuits.

This digital multimeter will remain operable between -40°C (for up to 20 mins) to +55°C and has a battery life twice that of its predecessor, the Fluke 87V TRMS Digital Multimeter.

Ensuring that the Fluke 87V MAX TRMS Digital Multimeter remains easy-to-read and easy-to-use in dark or dimly lit locations is its large display with two-level bright white backlight and backlit function buttons. The Fluke 87V MAX TRMS Digital Multimeter’s display can be set to 20 000 counts using the Hi-Resolution mode.

Measurements

As the Fluke 87V MAX TRMS Digital Multimeter has been designed to troubleshoot circuit breakers, circuitry, switchgear, distribution boards, panel boards, starters, motors, VFDs, panels and motor controls, it includes a comprehensive array of measurement capabilities including:

• AC/ DC voltage up to 1000V
• AC/ DC current up to 10A (20A for 30 seconds)
• Capacitance up to 10 000µF
• Frequency up to 200kHz
• Resistance test
• Continuity test
• Diode test

The Fluke 87V MAX TRMS Digital Multimeter also includes an integrated thermometer for temperature measurements.

The Fluke 87V MAX TRMS Digital Multimeter has been designed to solve complex problems which are often beyond the capabilities of standard digital multimeters, such as those pertaining to VFDs. To this end, it includes a number of features designed to improve measurement accuracy such as a low-pass filter for accurate voltage and frequency measurements on adjustable speed motor drives and electrically noisy equipment. The Fluke 87V MAX TRMS Digital Multimeter is also equipped with a Relative mode designed for removing test lead resistance when conducting low ohms measurements.  

Moreover, the Fluke 87V MAX TRMS Digital Multimeter’s ability to perform true-RMS AC voltage and current measurements ensure that non-linear signals can be checked accurately. This instrument also features an extended AC voltage bandwidth (15Hz to 20kHz).

The Fluke 87V MAX TRMS Digital Multimeter is a durable, dependable and dynamic DMM specifically designed to perform on-site troubleshooting regardless of the location.

Fluke 87V MAX TRMS Digital Multimeter Key Features

• Rugged, dustproof, waterproof and equipped with a complete selection of electrical tests
• Ideal for on-site troubleshooting applications in outdoor, dark, wet, dusty and/or hazardous environments
• Suitable for industrial and facilities electricians working in cement plants, electrical utilities, food processing facilities, chemical processing facilities, steel mills, foundries, mines, military sites and petrochemical sites
• Industrial-strength, sealed and IP67-rated casing and holster
• Will remain functional in areas where other DMMs would fail
• Dustproof
• Waterproof
• Drop tested from 4m (with holster)
• Suitable for use in rugged environments
• Suitable for use in areas with high dust concentrations
• Suitable for use in areas with high levels of humidity or rainfall
• The reversible holster provides protection when the DMM is not in use
• Safety rating: CAT IV 600V/ CAT III 1000V
• Protected against 8000V spikes caused by load switching and faults on industrial circuits
• Operating temperature range: -40°C (for up to 20 mins) to +55°C
• Has a battery life twice that of its predecessor, the Fluke 87V TRMS DMM
• Large display with two-level bright white backlight
• Backlit function buttons
• Suitable for use in dark or dimly lit environments
• Hi-resolution mode: set the display to 20 000 counts
• Troubleshoot circuit breakers, circuitry, switchgear, distribution boards, panel boards, starters, motors, VFDs, panels and motor controls
• AC/ DC voltage up to 1000V
• AC/ DC current up to 10A (20A for 30 seconds)
• Capacitance up to 10 000µF
• Frequency up to 200kHz
• Resistance test
• Continuity test
• Diode test
• Integrated thermometer
• Designed to solve complex problems such as those pertaining to VFDs
• Low-pass filter for accurate voltage and frequency measurements on adjustable speed motor drives and electrically noisy equipment
• Relative mode: removes test lead resistance when conducting low ohms measurements
• Perform TRMS AC voltage and current measurements
• Measure non-linear signals accurately
• Extended AC voltage bandwidth: 15Hz to 20kHz
• Durable, dependable and dynamic DMM
• Specifically designed to perform on-site troubleshooting regardless of the location

Fluke C115 Soft Carrying Case Key Features

• Two padded pockets for carrying two test instruments
• Pouch for test leads and accessories
• Durable polyester 600D case
• One-year warranty from Fluke

Fluke ToolPak™ Magnetic Meter Hanging Kit Key Features

• Hang the Fluke 87MAX DMM on nails, hooks and other objects
• Enables hands-free measurements
• Powerful, rare earth magnetic hanger strap
• Durable

Fluke TL224 SureGrip™ Insulated Test Leads Key Features

• Red and black digital multimeter test leads
• Reinforced strain relief
• Safety shrouded
• Standard diameter banana plugs for a variety of test lead configurations
• One end features a right angle connector and the other features a straight connector
• Safety rated: CAT IV 600V, CAT III 1000V
• 10A rated
• CSA listed
• Rubber over-moulded surfaces and finger-hugging curves provide a comfortable, reliable grip
• 1.5m silicone wires that resist the heat and cold

Fluke AC220 SureGrip™ Alligator Clips Key Features

• One small, insulated, red clip with nickel-plated jaws
• One small, insulated, black clip with nickel-plated jaws
• For use with Fluke’s TL222 and TL224 Test Leads
• The blunt tips can be used to grab screw-heads up to 9.5mm
• Rubber over-moulded surface and finger-hugging cures for improved grip
• CAT IV 600V, CAT III 1000V
• 10A rated
• CSA listed
• One-year warranty from Fluke

Fluke TL238 SureGrip™ Test Probes Key Features

• Specifically designed for high energy environments
• Only 4mm of exposed metal at the tip reducing the risk of accidental shorts that could result in arc flash explosions
• Probe extenders fit between modular test leads and test probes
• Probe extenders increase the distance between the user and the live circuit by 20.5cm/ 8”
• IEC 1010-2-031
• CAT III 1000V, CAT IV 600V
• Pollution degree 2
• 10A rated 

Fluke 80BK-A DMM Temperature Probe Key Features

• Temperature range: -40°C to +260°C
• Accuracy: ±2.2°C or 2% (whichever is greater)
• One-piece construction
• 1m (39”) lead
• Type-K thermocouple
• Standard shrouded banana jack

What’s Included?

• Fluke 87V MAX TRMS Digital Multimeter
• Fluke C115 Soft Carrying Case
• Fluke ToolPak™ Magnetic Meter Hanging Kit
• Fluke TL224 SureGrip™ Insulated Test Leads
• Fluke AC220 SureGrip™ Alligator Clips
• Fluke TL238 SureGrip™ Test Probes
• Fluke 80BK-A DMM Temperature Probe