Socket Testers & Adaptors
-
£60.00 £50.00
- Optimised for use on UK 55-0-55V (110V) construction sites
- Includes indications for the position of L1, L2 and Centre Tap
- Audible alert indicates correct or incorrect wiring quickly and clearly
50 Reward PointsPrice Match GuaranteeSOK50/16HD -
£62.40 £52.00
- Test live and dead three-phase electrical systems
- Maintain compliance with 18th Edition regulations
- Includes a flying test lead for the connection of appropriate plugs
52 Reward PointsPrice Match GuaranteeKEW3PH -
£64.91 £54.09
- Connect your Seaward HAL Hipot Tester to your Desk Test ‘n’ Tag Printer
54 Reward PointsPrice Match GuaranteeH-5030 -
£66.00 £55.0055 Reward PointsPrice Match GuaranteeKEWLMKIT
-
£69.60 £58.00
- Includes 5 most common lamp adapters, 2-wire lead set, & carry case
- IEC 61010 compliant
- Test without disturbing lamp housing or wiring
58 Reward PointsPrice Match Guarantee1014-833 -
£70.80 £59.00
- Includes 5 adapters for most light fittings
- Fast and effective way to check insulation/continuity/loop/polarity
- Saves time
59 Reward PointsPrice Match GuaranteeLTKIT10 -
£76.02 £63.35
- Check the phase sequencing of sockets
- Optimised for heavy-duty environments such as industrial sites
- Quick response time with clear visual and audible indications
63 Reward PointsPrice Match GuaranteeSOK60/16HD -
£87.00 £72.50
- Multiple LED indication of phase status
- Suitable for use in 16A/3P + E sockets
- Four-pin plug
72 Reward PointsPrice Match GuaranteeMARPC104/16 -
£87.54 £72.95
- Includes R2 socket adaptor
- Also comes with Lightmate Kit
- Supplied with jump leads
72 Reward PointsPrice Match GuaranteeR2TESTKIT -
£88.80 £74.00
- Verifies the earth wiring
- Advanced Socket Tester
- Detects 28 socket wiring fault conditions
74 Reward PointsPrice Match GuaranteeMARTST5
About Socket Testers & Adaptors
Socket testers are an essential part of any electrician's toolkit, and allow users to quickly and easily evaluate the internal wiring of a socket without the need to remove the socket faceplate and potentially cause damage to the installation.
Generally extremely cost effective and cheap, socket testers are also incredibly simple to use, and require the user to simply insert the tester into a socket and the tester will do the rest. Depending upon the type of socket tester used the way information is communicated will be different; some socket testers use LED indicators to show wiring status, while others use the audible indication to show correct wiring/problems with the installation. Some also use a combination of audible and visual indicators, allowing users to quickly tell if there's a problem with a socket or not.
The visual indicators of socket testers are perhaps the handiest part of the tester. These often come with exact representations of what's wrong with the wiring, so if live earth was reversed, for example, the tester would illuminate with a combination that denotes this problem. Most socket testers also include a handy reference guide on the front so users can determine what exactly the different LED indicators mean.
This section also contains socket adaptors; these differ from socket testers as they are designed generally to be inserted into a socket and the user then uses another tester such as a multimeter and a set of test leads to carry out socket testing. They can also include socket testers attached to specific plugs, such as those plugs used in industrial applications.
Most socket testers and adaptors available in-store come with standard UK three-pin plug connectors (except if they are designed for specific sockets such as the aforementioned industrial sockets).