Socket Testers & Adaptors
-
£15.48 £12.90
- Special design for quick installation and removal
- Straightforward and quick to use
- Lightweight and portable
12 Reward PointsPrice Match GuaranteeMARTST1 -
£16.08 £13.40
- Fast and easy
- Audible signal
- Three LEDs
13 Reward PointsPrice Match GuaranteeMARTST2 -
£18.00 £15.00
- Test all wall socket plugs and outlets
- Take quick R1 and R2 measurements
- Compatible with any meter that has a 4mm plug
15 Reward PointsPrice Match GuaranteeMARSB13 -
£23.99 £19.99
- 4mm earth connection
- Guarantee good earth
19 Reward PointsPrice Match GuaranteeMARCP520 -
£48.00 £40.00
- Capable of detecting twenty-eight fault conditions
- An advanced socket tester as defined by the Health & Safety Executive
- Verifies earth wiring using a non-trip earth loop test
40 Reward PointsPrice Match GuaranteeMARTST4 -
£50.40 £42.00
- Simple to use; just plug it into any socket
- Fitted with a standard blue pin plug
- LED lights show you if there is a problem
42 Reward PointsPrice Match GuaranteeMARCP201 -
£52.80 £44.00
- 110V industrial plug connector
- Shows wiring status using LEDs
- Essential for industrial applications
44 Reward PointsPrice Match GuaranteeMARCP301
About Socket Testers & Adaptors
Socket testers are an essential part of any electrician's toolkit, and allow users to quickly and easily evaluate the internal wiring of a socket without the need to remove the socket faceplate and potentially cause damage to the installation.
Generally extremely cost effective and cheap, socket testers are also incredibly simple to use, and require the user to simply insert the tester into a socket and the tester will do the rest. Depending upon the type of socket tester used the way information is communicated will be different; some socket testers use LED indicators to show wiring status, while others use the audible indication to show correct wiring/problems with the installation. Some also use a combination of audible and visual indicators, allowing users to quickly tell if there's a problem with a socket or not.
The visual indicators of socket testers are perhaps the handiest part of the tester. These often come with exact representations of what's wrong with the wiring, so if live earth was reversed, for example, the tester would illuminate with a combination that denotes this problem. Most socket testers also include a handy reference guide on the front so users can determine what exactly the different LED indicators mean.
This section also contains socket adaptors; these differ from socket testers as they are designed generally to be inserted into a socket and the user then uses another tester such as a multimeter and a set of test leads to carry out socket testing. They can also include socket testers attached to specific plugs, such as those plugs used in industrial applications.
Most socket testers and adaptors available in-store come with standard UK three-pin plug connectors (except if they are designed for specific sockets such as the aforementioned industrial sockets).