Oscilloscope Accessories
-
£19.20 £16.00
- Suitable racking plate for the RM300/RM300A
- Not recommended for use as a battery charger
16 Reward PointsPrice Match Guarantee51200-0060 -
£19.20 £16.00
- Rack blanking plate
- Suitable for RM410
- Not recommended for use as a battery charger
16 Reward PointsPrice Match Guarantee51200-0220 -
Free Precision Screwdrivers£20.46 £17.05
- GPS antenna
- SMA(M), 100cm
- Suitable for the SHA850A Series
17 Reward PointsPrice Match GuaranteeANT-GPS1 -
£21.60 £18.00
- Additional/Replacement Universal AC Adaptor
- Suitbale for the PSA Series 2 or 5, TF930/960 and, I-prober 520
18 Reward PointsPrice Match Guarantee51151-0830 -
£28.80 £24.00
- For use with Aim-TTi’s PSA Series 2 and 5 Analysers
24 Reward PointsPrice Match Guarantee58350-2100 -
Free Precision Screwdrivers£31.82 £26.52
- AC-DC adapter
- Suitable for the SHA850A Series
26 Reward PointsPrice Match GuaranteeSHA800-AP -
Free Precision Screwdrivers£37.20 £31.00
- 2GHz bandwidth
- Male N-to-BNC cable
- 0.7m (27.6 inches) in length
31 Reward PointsPrice Match GuaranteeN-BNC-2L -
£42.00 £35.00
- Adds temperature measurement
- Dual input temperature adapter
- 10M Ohm input impedance
35 Reward PointsPrice Match GuaranteeTPI-A312 -
£48.00 £40.00
- For use with Aim-TTi’s PSA Series 2 and Series 5 Spectrum Analysers
- Determine the frequency of RF sources
- Take relative measurements of amplitude
40 Reward PointsPrice Match Guarantee58350-2800 -
£58.56 £48.80
- Safety designed
- Two adapters in a pack
- Female BNC to shielded banana adapter
48 Reward PointsPrice Match GuaranteeBB120 -
£59.03 £49.19Fluke TAS90 Automotive Accessory Set (120/190 Series)49 Reward PointsPrice Match GuaranteeTAS90
About Oscilloscope Accessories
Oscilloscopes are powerful and flexible test instruments. To further exploit the range of tests available to electrical test engineers, lab technicians, or automotive engineers, there is a whole load of accessories available including probes and probe sets, adapter plugs, break-out adapters, and spare battery packs for hand-held models.
If you need to convert from BNC to a banana plug or measure voltage drops with a current shunt you will find the cable or sensor adapter here at Tester.
You may already have amassed a fine collection of accessories so why not keep them in a purpose-built carrying case? This will keep your meter and accessories together and ensure that you're always ready to go on a job wherever it may be.