Oscilloscope Accessories
-
Free Precision Screwdrivers£186.00 £155.00
- 16 Channels
- MSO Software
- Compatible with the SLA1016 Mixed Signal Option
155 Reward PointsPrice Match GuaranteeSDS1000XHD-16LA -
£186.00 £155.00
- 4U Rack Mount for QL PSUs
- Can mount many combinations
- Includes two 1/3 rack blanking plates
155 Reward PointsPrice Match Guarantee51200-0210 -
Free Precision Screwdrivers£190.80 £159.00
- 3U Height
- Suitable for 19" racks
- Compatible with SDG7000A AWGs, SSG3000X, and SSG5000X generators
159 Reward PointsPrice Match GuaranteeSSG-RMK -
Free Precision Screwdrivers£190.93 £159.11
- Rechargeable lithium battery
- Suitable for the SHA850A Series
159 Reward PointsPrice Match GuaranteeSHA800-BAT -
Free Precision Screwdrivers£190.93 £159.11
- GPS receiver
- Suitable for the SHA850A Series
159 Reward PointsPrice Match GuaranteeSHA850-GPS -
Free Precision Screwdrivers£190.93 £159.11
- GPS logging
- Requires option SHA850-GPS (sold separately)
- Suitable for the SHA850A Series
159 Reward PointsPrice Match GuaranteeSHA850-GPSM -
£204.00 £170.00
- Two overlapping frequency ranges spanning 3Hz to 3GHz
- Low pass filter reduces noise at low frequencies
- Push-to-Measure function
170 Reward PointsPrice Match Guarantee58131-0300 -
£210.00 £175.00
- Can accommodate up to four ¼-rack PL or CPX400S (single output) power supply units
- Can accommodate up to four two ½-rack PL or CPX400D (dual output) PSUs
- Can hold one QPX1200 or QPX600D Power Supply
175 Reward PointsPrice Match Guarantee51200-0390 -
Free Precision Screwdrivers£222.00 £185.00
- 3U height
- Compatible with 19" racks
- Suitable for Siglent SPS5000X series
185 Reward PointsPrice Match GuaranteeSPS5000X-RMK -
£232.80 £194.00
- Oscilloscope probe
- High-voltage passive probe
- Suitable for use with ScopeMeter 120 Series
194 Reward PointsPrice Match GuaranteeVPS41 -
£234.00 £195.00
- Suitable for use with the Fluke ScopeMeter 120 Series
- Set of two double insulated silicone shielded test leads
195 Reward PointsPrice Match GuaranteeSTL120-IV -
£253.20 £211.00
TRM50 Coaxial Feed-through BNC male to BNC female Cable Terminator.
211 Reward PointsPrice Match GuaranteeTRM50 -
£261.60 £218.00
- View on PC
- Installable at any time
- Suitable for PSA3605 or PSA600
218 Reward PointsPrice Match Guarantee58350-2600 -
Free Precision Screwdrivers£262.80 £219.00
- Frequency range of DC to 18 or 26 GHz
- Maximum VSWR of 1.25:1
- Male to Male
219 Reward PointsPrice Match GuaranteeSMA-SMA-18L/26L -
£268.80 £224.00
- 600W output provided
- -20dB output attenuator incorporated
- An "output clip" LED is provided to warn if the output amplitude exceeds 15V
224 Reward PointsPrice Match Guarantee59160-0010 -
Free Precision Screwdrivers£270.00 £225.00
- 6U or 7U height
- Compatible with 19" racks
- Suitable for digital oscilloscopes
225 Reward PointsPrice Match GuaranteeSDS2/6000-RMK -
£280.74 £233.95
- Green
- Safety Rating 1000V CAT III
- ScopeMeter industrial voltage probe set
233 Reward PointsPrice Match GuaranteeVPS410-II-V -
£280.74 £233.95
Industrial Voltage Probe Set 500 MHz 10:1 Red. For ScopeMeter.
233 Reward PointsPrice Match GuaranteeVPS410-II-R -
£280.74 £233.95
Voltage probe set 500 MHZ 10:1 Blue. For ScopeMeter.
233 Reward PointsPrice Match GuaranteeVPS510-B -
£280.74 £233.95
Voltage probe set 500 MHZ 10:1 Grey. For ScopeMeter.
233 Reward PointsPrice Match GuaranteeVPS510-G -
£280.74 £233.95
Voltage Probe set 500 MHZ 10:1 Red. For ScopeMeter.
233 Reward PointsPrice Match GuaranteeVPS510-R -
£280.74 £233.95
Voltage probe set 500 MHZ 10:1 Green. For ScopeMeter.
233 Reward PointsPrice Match GuaranteeVPS510-V -
Free Precision Screwdrivers£286.80 £239.00
- Power analysis option
- Compatible with SDS800X HD oscilloscopes
- Power measurements and analysis
239 Reward PointsPrice Match GuaranteeSDS800XHD-PA -
£289.20 £241.00
- Interchangeable power cable included
- Universal power cable set (EU, US, UK, AU, Japan, Brazil)
- Suitable replacement or second power supply for the Fluke 190-series
241 Reward PointsPrice Match Guarantee4821057
About Oscilloscope Accessories
Oscilloscopes are powerful and flexible test instruments. To further exploit the range of tests available to electrical test engineers, lab technicians, or automotive engineers, there is a whole load of accessories available including probes and probe sets, adapter plugs, break-out adapters, and spare battery packs for hand-held models.
If you need to convert from BNC to a banana plug or measure voltage drops with a current shunt you will find the cable or sensor adapter here at Tester.
You may already have amassed a fine collection of accessories so why not keep them in a purpose-built carrying case? This will keep your meter and accessories together and ensure that you're always ready to go on a job wherever it may be.