Oscilloscope Accessories

• Passive oscilloscope probe
• Suitable for use with the 350MHz models

• Store and transport
• Portable bag
• Suitable for the SHA850A Series

• High-quality SMA terminated cable has low-loses of up to 6GHz
• SMA to N-type adapters for connecting the PSA to a generator
• BNC to N-type adapters for use with BNC cables

• High quality
• Specifically designed for Aim-TTi
• Not recommended for use as a battery charge

• Soft carry case
• Store and transport Aim-TTi’s PSA Series 2 & 5 Spectrum Analysers

Hanging Hook for ScopeMeter Series 190 II

• Mixed signal analysis option
• Compatible with SDS800X HD oscilloscopes
• 16 digital channels

• 45 built-in arbitrary waveforms
• Output frequency up to 25 MHz
• -3 V ~ +3 V output amplitude range

• Consists of two adapters
• Male BNC to dual female BNC T-piece

• Hard carrying case for testers + accessories
• Briefcase-style
• High durability

• Passive oscilloscope probe
• Suitable for use with the 500MHz models

• 6 basic waveforms: Sine, Square, Ramp, Pulse, Noise, and DC
• 45 built-in arbitrary waveforms
• Output frequency up to 25 MHz

• 4U rack unit
• Compatible with 19" racks
• Suitable for the SDS1000X-E and SDS2000X-E oscilloscope models

• Soft carry case
• Suitable for the SDS2000X, SDS2000X Plus, SDS5000X, SSA3000X, SVA1000X, SSA3000X-R, and SSA3000X Plus models

• Interface module
• GPIB Interface Option Retrofits
• Suitable for TG/P/F, TSX-P, and MX-QP series

• Stable and accurate noise source output
• Measure noise figure and gain
• Frequency range of 9 kHz to 7.5 GHz

• DC bias out option
• SMB(F), D12V-32V,0.1V step
• Suitable for the SHA850A Series

• Available in 0.5m or 1.5m
• Maximum signal voltage: 300V RMS
• Maximum voltage to ground: 600V RMS

• 4U rack unit
• Compatible with 19" racks
• Suitable for the SPC3303C, SPD3303D, SPD3303S, SPD3303X & SPD3303X-E models

• 6U rack unit
• Compatible with 19" racks
• Suitable for the SSA3000X, SSA3000X Plus, and SVA1000X spectrum analyzers

• Rackmount
• Aim-TTi Equipment 3U rackmount
• 2 & 4 Channel TGA Arbitrary Generators

• Includes half-rack blanking plate
• Not recommended for use as a battery charger
• Suitable for most TTi 3U half-rack power supplies and other instruments

• View on PC
• Installable at any time
• Suitable for PSA1302 and PSA2702