Oscilloscope Accessories
-
Aim-TTi RM350 3U Half Rack Blanking Plate for RM300
£19.20 £16.00- Suitable racking plate for the RM300/RM300A
- Not recommended for use as a battery charger
16 Reward PointsPrice Match Guarantee51200-0060 -
Aim-TTi RM415 4U 1/3 Rack Blanking Plate for RM410
£19.20 £16.00- Rack blanking plate
- Suitable for RM410
- Not recommended for use as a battery charger
16 Reward PointsPrice Match Guarantee51200-0220 -
Aim-TTi UAC-B Universal AC Adaptor for PSA, TF & I-Prober
£21.60 £18.00- Additional/Replacement Universal AC Adaptor
- Suitbale for the PSA Series 2 or 5, TF930/960 and, I-prober 520
18 Reward PointsPrice Match Guarantee51151-0830 -
Aim-TTi PSA-VC Vehicle Charger for PSA Series 2/5 Spectrum Analysers
£28.80 £24.00- For use with Aim-TTi’s PSA Series 2 and 5 Analysers
24 Reward PointsPrice Match Guarantee58350-2100 -
Aim-TTi PSA-ANT2 Wideband Telescopic Antenna
£48.00 £40.00- For use with Aim-TTi’s PSA Series 2 and Series 5 Spectrum Analysers
- Determine the frequency of RF sources
- Take relative measurements of amplitude
40 Reward PointsPrice Match Guarantee58350-2800 -
Aim-TTi PSA-CK Cable and Connector Kit for PSA Spectrum Analysers
£82.80 £69.00- High-quality SMA terminated cable has low-loses of up to 6GHz
- SMA to N-type adapters for connecting the PSA to a generator
- BNC to N-type adapters for use with BNC cables
69 Reward PointsPrice Match Guarantee58350-2700 -
Aim-TTi RM50A 2U Rack Mount for Bench Instruments
£96.00 £80.00- High quality
- Specifically designed for Aim-TTi
- Not recommended for use as a battery charge
80 Reward PointsPrice Match Guarantee51200-0280 -
Aim-TTi PSA-SC2 Soft Transit Case for PSA Series 2 & 5
£102.00 £85.00- Soft carry case
- Store and transport Aim-TTi’s PSA Series 2 & 5 Spectrum Analysers
85 Reward PointsPrice Match Guarantee58350-1500
About Oscilloscope Accessories
Oscilloscopes are powerful and flexible test instruments. To further exploit the range of tests available to electrical test engineers, lab technicians, or automotive engineers, there is a whole load of accessories available including probes and probe sets, adapter plugs, break-out adapters, and spare battery packs for hand-held models.
If you need to convert from BNC to a banana plug or measure voltage drops with a current shunt you will find the cable or sensor adapter here at Tester.
You may already have amassed a fine collection of accessories so why not keep them in a purpose-built carrying case? This will keep your meter and accessories together and ensure that you're always ready to go on a job wherever it may be.
