Oscilloscope Accessories
-
£144.00 £120.00
- Interface module
- GPIB Interface Option Retrofits
- Suitable for TG/P/F, TSX-P, and MX-QP series
120 Reward PointsPrice Match Guarantee59130-1810 -
£165.60 £138.00
- Rackmount
- Aim-TTi Equipment 3U rackmount
- 2 & 4 Channel TGA Arbitrary Generators
138 Reward PointsPrice Match Guarantee51200-0150 -
£165.60 £138.00
- Includes half-rack blanking plate
- Not recommended for use as a battery charger
- Suitable for most TTi 3U half-rack power supplies and other instruments
138 Reward PointsPrice Match Guarantee51200-0190 -
£165.60 £138.00
- View on PC
- Installable at any time
- Suitable for PSA1302 and PSA2702
138 Reward PointsPrice Match Guarantee58350-1800 -
£165.60 £138.00
- Single-position tilt stand
- Not recommended for use as a battery charger
- Suitable for instruments in the later Aim-TTi plastic case
138 Reward PointsPrice Match Guarantee51200-0340 -
£186.00 £155.00
- 4U Rack Mount for QL PSUs
- Can mount many combinations
- Includes two 1/3 rack blanking plates
155 Reward PointsPrice Match Guarantee51200-0210 -
£204.00 £170.00
- Two overlapping frequency ranges spanning 3Hz to 3GHz
- Low pass filter reduces noise at low frequencies
- Push-to-Measure function
170 Reward PointsPrice Match Guarantee58131-0300 -
£210.00 £175.00
- Can accommodate up to four ¼-rack PL or CPX400S (single output) power supply units
- Can accommodate up to four two ½-rack PL or CPX400D (dual output) PSUs
- Can hold one QPX1200 or QPX600D Power Supply
175 Reward PointsPrice Match Guarantee51200-0390 -
£261.60 £218.00
- View on PC
- Installable at any time
- Suitable for PSA3605 or PSA600
218 Reward PointsPrice Match Guarantee58350-2600 -
£268.80 £224.00
- 600W output provided
- -20dB output attenuator incorporated
- An "output clip" LED is provided to warn if the output amplitude exceeds 15V
224 Reward PointsPrice Match Guarantee59160-0010 -
Free UK DeliveryAim-TTi I-Prober 520 Positional Current/Field Probe£822.00 £685.00
- High-accuracy, general-purpose H-field probe
- Wide dynamic range: 10mA to 20A peak-to-peak
- Attach to any oscilloscope
685 Reward PointsPrice Match Guarantee58250-0010
About Oscilloscope Accessories
Oscilloscopes are powerful and flexible test instruments. To further exploit the range of tests available to electrical test engineers, lab technicians, or automotive engineers, there is a whole load of accessories available including probes and probe sets, adapter plugs, break-out adapters, and spare battery packs for hand-held models.
If you need to convert from BNC to a banana plug or measure voltage drops with a current shunt you will find the cable or sensor adapter here at Tester.
You may already have amassed a fine collection of accessories so why not keep them in a purpose-built carrying case? This will keep your meter and accessories together and ensure that you're always ready to go on a job wherever it may be.