Crimp Tools / Pliers & Crimping Accessories

• Hardened steel crimping tool
• Suitable for insulated and non-insulated terminals
• Built-in wire stripper

C.K Crimping Pliers For Boot Lace Ferrules 0.25-2.5mm 145mm

• 0.5-6 mm², 10-25 mm², or 35-50 mm² ranges
• Compatible with several Klauke crimping tools
• Suitable for use on cable end sleeves

• Heavy-duty construction
• Factory-set crmp
• Full cycle ratchet mechanism

• Crimp dies
• Hexagonal-shaped profile
• 120, 185, 240, or 300mm

• Bell mouth ferrule pliers
• Auto-stop ratchet system
• Heavy-duty construction 

• Carrying case
• Ideal for transportation and storage
• Compatible with the RIDGID StrutSlayr Shear Head

Cu tube connector ratchet crimping tool 0.75-16mm²

Self-setting crimping tool for cable end-sleeves and twin cable end-sleeves 0.14 - 10 mm²

Self-setting crimping tool for cable end-sleeves and twin cable end-sleeves 0.14 - 10 mm²

K 507 Crimping tool with interchangeable dies

Self-adjusting crimping tool for cable end-sleeves and twin cable end-sleeves 0.08 - 16 mm²

Self-setting crimping tool for cable end-sleeves and twin cable end-sleeves 0.08 - 16 mm²

Crimping tool for insulated cable connections 0.5 - 6 mm²

Twist-it Bootlace ferrule crimping tool with rotating jaw suitable for 0.14 - 10.0mm²

• Rotating hex die crimping tool
• Suitable for Cu tube terminals L-Series
• 10-70mm2

• 13/16" (41mm x 21mm)
• Die Shear
• Suitable for the RIDGID StrutSlayr

• 1 5/8" (41mm x 41mm)
• Die Shear
• Suitable for the RIDGID StrutSlayr

• Rotating hex die crimping tool
• Suitable for Cu tube terminals L-Series
• 6-120mm2

Set of L series hex crimping dies for the 22 series tools from 6 - 300mm2, e.g. EKM6022CFB, HK6022, etc.

• One-button operating system for controlling all functions
• Lightweight and high speed for maximum efficiency
• LED for illuminating work spaces

• Hexagonal profile
• Stored in a plastic case
• Suitable for the K 35/4, EK 35/4 & EK 35/4 L Klauke crimp tools

• Burr-free cuts
• No sparks from grinding or sawing
• Clean and regular cuts in 5 seconds

Set of hexagonal crimping dies for Cu connectors 6-150mm2. Suitable for Klauke 4 series tools e.g. EK354