Metrel MI2166 Low-Voltage Earthing Demonstration Board

The Metrel MI2166 Low-Voltage Earthing Demonstration Board can be used to simulate the electrical installations used in houses and apartments. This makes it of particular use to sales personnel demonstrating the measuring capabilities present on Metrel’s multifunction installation testers.

This demonstration board can be used to simulate TN and TT systems. It also features a number of electrical components on its front board including RCDs, an On/Off switch with a lamp, mains test outlet and connection terminals. These components and simulation capabilities facilitate the user’s ability to demonstrate how to measure various electrical parameters in accordance with EN 61557. The Metrel MI2166 Low-Voltage Earthing Demonstration Board can be used to demonstrate the following tests and measurements:

• Insulation resistance tests
• Measurements of the continuity of PE conductors
• Earth resistance measurements (using four-lead and two-clamp methods)
• Specific earth resistance measurements
• Loop and line impedance tests
• Phase rotation tests
• Load current measurements
• RCD tests
• Contact voltage measurements

It is possible to use this board to demonstrate all standardised methods of testing.

Further to this, the Metrel MI2166 Low-Voltage Earthing Demonstration Board can be programmed to present up to five pre-set errors. This allows sales personnel to demonstrate the Metrel multifunction installation testers' effectiveness at detecting and identifying faults.

Finally, the Metrel MI2166 Low-Voltage Earthing Demonstration Board is supplied in a rugged case with a handle, enabling it to be easily, safely and conveniently transported between demonstrations.

The Metrel MI2166 Low-Voltage Earthing Demonstration Board is ideal for demonstrating the complete testing of electrical installations using Metrel’s test equipment. It is an essential tool for sales personnel.

 Metrel MI2166 Low-Voltage Earthing Demonstration Board Key Features

• Simulates electrical systems used in houses and apartments
• Of particular use to sales personnel demonstrating the measuring capabilities of Metrel’s multifunction installation testers
• Simulates TN and TT systems
• Includes various electrical components on its front board including RCDs, an On/Off switch with a lamp, mains test outlet and connection terminals
• Can be used to demonstrate how to measure various electrical parameters in accordance with EN 61557
• Measure Insulation resistance
• Test the continuity of PE conductors
• Conduct earth resistance readings using four-lead and two-clamp methods
• Measure specific earth resistance
• Measure loop and line impedance
• Conduct phase rotation tests
• Read the load current
• Conduct RCD tests
• Perform contact voltage tests
• Suitable for demonstrating all standardised methods of testing
• Can be programmed to present up to five pre-set errors
• Supplied in a rugged case with a handle
• Ideal for demonstrating the complete testing of electrical installations using Metrel’s test equipment
• An essential tool for sales personnel

What’s Included?

• Metrel MI2166 Low-Voltage Earthing Demonstration Board
• Jumper, 2pcs
• Mains Cable
• Instruction Manual
• Calibration Certificate