Coating Thickness Gauges
-
£186.00 £155.00
- Automatically recognised both ferrous and non-ferrous substrates
- Store and recall up to 255 measurements
- Audible high and low alarms
155 Reward PointsPrice Match GuaranteeCG104 -
£226.80 £189.00
- Automatic substrate recognition
- Magnetic induction for ferrous substrates
- Eddy current measurement for non-ferrous substrates
189 Reward PointsPrice Match GuaranteeCG204 -
Free UK DeliverySauter TD 225-0.1US Ultrasonic Thickness Gauge£448.92 £374.10
- Ultrasonic testing of thickness
- External sensor
- High precision results
374 Reward PointsPrice Match GuaranteeTD 225-0.1US -
Free UK DeliverySauter TE 1250-0.1FN Combination Coating Thickness Gauge£481.32 £401.10
- External sensor reaches hard-to-reach points
- For use with steel/iron, insulating and non-metallic coatings
- High precision
401 Reward PointsPrice Match GuaranteeTE 1250-0.1FN -
Free UK DeliverySauter TO 100-0.01EE Ultrasonic Thickness Gauge£1,379.28 £1,149.40
- Dual measuring modes
- Ultrasonic technology
- High-precision mode
1149 Reward PointsPrice Match GuaranteeTO 100-0.01EE -
Free UK DeliveryExtech TKG250 Colour Waveform Ultrasonic Thickness Gauge / Datalogger£2,110.00 £1,758.33
- Comprehensive evaluation of thickness levels in steel
- Full colour high quality LCD display
- Built-in datalogger stores thousands of readings
1758 Reward PointsPrice Match GuaranteeTKG250
About Coating Thickness Gauges
There are meters and test tools for a multitude of tasks and, if it exists, we seek to stock them at Tester. If you want to be sure that all coats of paint have been applied to a newly sprayed car body you'll need a coating thickness tester. You may be looking after fruit shipments and need to check the hardness of fruit to determine its shelf life or storage potential; for that, you'll need a Fruit Hardness Tester.
Thickness gauges operate in a similar way to sonar. They use ultrasound to send a pulse through a layer of material, such as paint layers, to an "opposite" surface such as the bodywork of a car. By measuring the bounce-back time, allowing for the signal velocity through the material, the meter will provide a clear readout of thickness.