The store will not work correctly in the case when cookies are disabled.
About Sound Meters
Used mainly for measuring sound in industrial and environmental areas and for quantifying
sound levels on aircraft, a sound level meter is an essential tool for professionals working
in areas where measuring sound accurately is a high priority.
A sound level meter from Tester will allow you to measure various amounts of sound within your
workspace, ensuring that it is at a safe operating level for human ears. In noisy environments,
not protecting employees' ears can lead to noise-induced deafness, so it is important to evaluate
the sound levels within your workspace if you're working with loud machinery, devices, or vehicles.
When measuring the levels of noise in an area, regulations state that the level of LEP,d (worker's
daily exposure to noise) must conform to certain standards as dictated by the Physical Agents Noise
Directive; an EU directive that came into effect in April 2006. These are:
- Lower action level (LEP,d 80dB(A)) - Individual hearing protectors should be made available, and training and information on the risk of hearing damage must be given to workers.
- Upper action level (LEP,d 85dB(A)) - Noise must be reduced where it can be. All employees must
have hearing protectors and make sure they wear them. Again, training and information must be provided on correctly using hearing protectors.
- Exposure limit (LEP,d 87dB(A)) - Under no circumstances should the exposure of the worker exceed these limits as it can be extremely dangerous.
By using a sound meter you can accurately measure the daily exposure a worker may be exposed to and then take relevant steps to ensure their hearing doesn't suffer lasting damage.
Sound Meter Types (Classes)
Sound level meters are not placed into one collective group - depending upon applicable standards they are defined as what's
known as sound meter classes, or sound meter types. The most generally accepted definition of a sound meter comes from IEC
regulations, which define that sound meters are placed in two different classes.
Known as class 1 and class 2 sound meters, this standard defines the difference between the two in the meters' overall
tolerance for error. Class 1 meters generally ship with a wider frequency range and tighter tolerance, whereas class 2 meters
are defined by the fact that they have a lower frequency wider, and lesser tolerance. This means that Class 1 sound level meters
are much more accurate and therefore are much more acceptable for use in noise surveys, particularly where measurement accuracy is of the utmost importance.
In addition to classes, the ruling IEC 61672-1 inserts sound meters into "three kinds of sound measuring instruments".
These are defined as a conventional sound level meter, an integrated-averaging sound level meter, and an integrating sound level meter.
Certain types of sound meters - which are governed by IEC 61252: 1993 - are known as noise dosimeters (noise dosemeters in Britain).
These meters are designed to integrate directly with a person to determine the noise exposure of that person over time and
are commonly used to comply with regulations such as Occupational Safety and Health (OSHA) 29 CFR 1910.95 Occupational Noise Exposure Standard or EU Directive 2003/10/EC.
Accepted Sound Meter Standards
To be classified as acceptable for use a sound meter generally must adhere to the standard IEC 61672
(or British standard equivalent BS EN 61672) to gain certifiable status as a Class 1 or Class 2 sound level
meter. Depending on the type of meter being used this standard may or may not be applicable in conjunction with other
standards, and there are several other standards available for things such as noise dosimeters, personal sound exposure
meters, and various other devices. Sound calibrators are also governed by their standards.
The following is a list of the currently accepted sound meter standards available around the world:
IEC 61672 - Electroacoustics - Sound Level Meters
The most commonly used standard, IEC 61672 is used as a quantifying tool for defining whether a modern sound meter is given
class 1 or class 2 status. The status is given depending on the tolerance and overall frequency range of the sound meter;
class 1 meters have a much higher tolerance than class 2 do, making them a much more accurate tool for quantifying overall sound levels.
Extech 407730 Digital Sound Level Meter£102.00 £85.00
Sauter SU 130 Professional Sound Meter£118.56 £98.80
Martindale SP79 Class 2 Sound Level Meter£150.00 £125.00
Beha-Amprobe SM-10 Type 2 Sound Meter£183.36 £152.80
Testo 815 Sound Level Meter£239.70 £199.75
