Extech EX840 1000A Clamp Meter + IR Thermometer

Need a comprehensive solution for testing current, voltage and even temperature? The EX840 is a great tool for the job.

An industrial-grade testing device, the EX840 is suitable for use in complex testing environments and gives users a quick and easy way to test various different parameters. When used as a clamp meter the EX840 is capable of fitting around conductors up to 43mm (1.7") in size, allowing it to take measurements on conductors up to 750MCM or 2 x 500MCM. Once it's attached the device can then be used to measure AC or DC current across a large range from 0.1 to 1000A with high basic accuracy of ±2.8%.

As well as clamp meter measurements the EX840 also comes with built-in multimeter capabilities and can measure AC/DC voltage from 0.1mV to 1000V, resistance from 0.1 to 40MΩ, capacitance from 0.001nF to 40000μF, frequency from 0.001kHz to 4kHz, type K temperature measurements from -4 to 1400°F (-20 to 760°C) and continuity, inrush and diode testing procedures.

The EX840 also comes with a built-iin IR thermometer which allows this device to measure surface temperatures without the need to make contact with the surface. This includes a laser pointer for exactly defining the surface area to be tested, and when used this mode allows IR temperature measurements between a range of -58 to 518°F (-50 to 270°C).

This product is EN 61010-1 compliant and has CAT III 1000V and CAT IV 600V safety ratings.

Extech EX840 1000A Clamp Meter + IR Thermometer Key Features

• Non-contact IR thermometer built into the unit
• Laser pointer
• True RMS current and voltage measurements
• Peak hold mode captures inrush currents and transients
• AC/DC voltage measurements
• Current measurements (AC/DC) to 1000A
• Resistance measurements
• Capacitance measurements
• Frequency measurements
• Diode measurements
• Continuity measurements
• 1.7" (43mm) jaw opening makes the device suitable for use on larger conductors
• 4000 count backlit LCD display
• Data hold
• MAX/MIN
• Auto power off when left idle
• Autoranging with manual range button

Full List of Products Included

• Extech EX840 1000A Clamp Meter + IR Thermometer
• CAT IV Test Leads
• 9V Battery
• General Purpose Type K Probe
• Pouch Case
• Professional Test Lead Set

Professional Test Lead Set Contents

• 2 x 42" (1m) PVC Lead Extensions with Shrouded Banana Plugs at Both Ends
• 2 x Modular 4" (102mm) Heavy Duty Test Probe Handles with 0.16" (4mm) Banana Plug Tip
• 2 x Standard Size Alligator Clips
• 2 x Extra Large, Double-Insulated Alligator Clips with 0.8" Jaw Opening