Dial Indicators
-
£48.36 £40.30
- Standard 0.01mm graduations
- O-ring and secure adhesion prevent water and oil ingress
- Hardened, scratch- and chemical-resistant coating
40 Reward PointsPrice Match Guarantee2XXXS/-09/-10/-60 -
£62.16 £51.80
- Optimised for applications where space is limited
- Outer bezel diameters range between 31mm and 40mm
- Ideal for restricted-space applications in gauging fixtures
51 Reward PointsPrice Match Guarantee1XXXS/T/TB-XX -
£65.34 £54.45
- Unique shock-proof mechanism
- Ideal for restricted-space applications
- Developed to eliminate the possibility of reading errors
54 Reward PointsPrice Match Guarantee19/29XXX/XX -
£84.42 £70.35
- Standard 0.0001” to 0.001” dial indicators with a 57mm-diameter bezel
- O-ring and secure adhesion prevent water and oil ingress
- Hard, scratch- and chemical-resistant coating on the crystal
70 Reward PointsPrice Match Guarantee2XXXS/-10 -
£90.47 £75.39
- Outer frame diameter: 57mm
- O-ring ensures air tightness between the outer frame and crystal case
- Hard, scratch- and chemical-resistant crystal coating
75 Reward PointsPrice Match Guarantee2XXXS/-10/-19 -
£97.91 £81.59
- Standard 0.001 or 0.005mm graduations
- O-ring and secure adhesion prevent water and oil ingress
- Hardened, scratch- and chemical-resistant coating
81 Reward PointsPrice Match Guarantee21XXS-10/70 -
£101.83 £84.86
- Peak-Hold Dial Gauge
- Adjustable-Hand Dial Gauge
84 Reward PointsPrice Match Guarantee204XA-10/80 -
£115.32 £96.10
- Parallel face indicator
- Vertical face indicator
- Useful for centering holes
96 Reward PointsPrice Match Guarantee513-45/8X-10X -
£115.38 £96.15
- Suitable for applications where there is limited space
- Ideal for situations where standard dial gauges would be difficult to read
- Mount onto levelling tool tables or inspection jigs
96 Reward PointsPrice Match Guarantee1XXXT/296XT -
£127.80 £106.50
- Large-diameter dial face for easy reading
- Stem and plunger made from high-strength, quench-hardened steel
- Supplied with a bezel clamp and limit markers
106 Reward PointsPrice Match Guarantee3/4XXXS-10/9 -
Free UK DeliveryMitutoyo Series 513 Universal Dial Test Indicator - Choice of 0.8 mm or .03"£444.00 £370.00
- Carbide contact points
- Universal application to all directions
- Adjustable without moving the indicator
370 Reward PointsPrice Match Guarantee513-30X-10T -
Free UK DeliveryMitutoyo Series 170 UDT-2 Dial Indicator Tester (Metric or Inch) - Choice of 0-25mm or 0-1"£1,812.00 £1,510.00
- Accuracy tester
- Accepts ø6 mm, ø8 mm, 1/4", and 3/8" indicator stems
- Suitable for 0.01 mm resolution dial indicators, dial test indicators, and bore gauges
1510 Reward PointsPrice Match Guarantee170-10X-10/12
About Dial Indicators
Dial indicators are used primarily for measuring gauges and fixtures. They are used to indicate the run-out (the misalignment between the workpiece's axis of rotational symmetry and the axis of rotation of the spindle) of the workpiece, with the ultimate aim of reducing it to a suitably small range using chuck jaw adjustments.