CAT & Genny Cable Detectors
-
Free UK DeliveryPACT SIGEN 2+ Signal Transmitter / Genny£678.00 £565.00- Can be used to avoid cables and pipes
- Compatible with cable locators capable of receiving 33kHz signals
- High- and low- volume and power outputs
565 Reward PointsPrice Match GuaranteeGB20182PLUS -
Free UK DeliveryPACT SIGEN 2+ Signal Transmitter / Genny Standard Kit£752.40 £627.00- Supplied with a Carry Bag
- Suitable for avoiding cables and pipes thereby reducing the strike rate
- Suitable for use with cable locators capable of receiving 33kHz signals
627 Reward PointsPrice Match GuaranteeGB2018SK -
Free UK DeliveryPACT TOMKAT S2 Pipe & Cable Locator/ CAT - Cable Avoidance Tool£840.00 £700.00- Detects the presence of cables and pipes up to 3m below the ground
- Three modes of operation: Power, Radio and Genny
- Issues an audible alert outputted via a detachable, waterproof speaker
700 Reward PointsPrice Match GuaranteeGB20182S -
Free UK DeliveryPACT TOMKAT V2 Pipe and Cable Locator / CAT - Cable Avoidance Tool£900.00 £750.00- Locate cables and pipes buried to up to a depth of 3m
- Visual and audible alerts
- Three operating modes: Power, Radio and Genny
750 Reward PointsPrice Match GuaranteeGB20182V -
Free UK DeliveryPACT SIGEN 2+ Signal Transmitter / Genny Electrician’s Kit£1,036.80 £864.00- Supplied with a carry bag, 3-pin plug connector and a 100mm signal clamp
- Avoid cables and pipes in order to perform electrical work safely and effectively
- Trace insulated cables by applying a signal directly to the conductor via the 100mm signal clamp
864 Reward PointsPrice Match GuaranteeGB2018EK -
Free UK DeliveryPACT SIGEN 2+ Signal Transmitter / Genny Drain Kit£1,036.80 £864.00- Supplied with a carry case and 5-metre sonde (33kHz)
- Avoid buried services and decrease strike rates
- Enables drainage contractors to carry out work safely, effectively and efficiently
864 Reward PointsPrice Match GuaranteeGB2018DK -
Free UK DeliveryPACT SIGEN 2+ Signal Transmitter / Genny Builder’s Kit£1,284.00 £1,070.00- Supplied with a carry bag, 100mm signal clamp and a 5-metre Sonde (33kHz)
- Find, follow and avoid buried cables and pipes on building sites
- 100mm Signal Clamp allows the user to trace insulated cables such as those used by street lamps
1070 Reward PointsPrice Match GuaranteeGB2018BK
About CAT & Genny Cable Detectors
Everything you need for detecting and tracing the path of underground buried utilities is included in this section. Don't neglect underground safety; use this equipment to quickly find hidden utilities.
Cable avoidance tools (CATs) and Gennys are essential equipment for use by any excavation professional. As modern society becomes increasingly reliant on underground structures, including electrical cabling, telecom cabling, and piping, the complexity of underground systems has increased over time.
This leads to a higher danger for those excavating to reach cabling and other installations. The chances of accidentally striking a live cable, causing damage to essential systems, and endangering yourself when digging has increased exponentially, thus increasing the importance of using detection equipment to accurately determine the location of buried utilities and work safely around them.
A CAT is used for this purpose and can detect signals naturally radiated from metallic surfaces to allow the user to map out the path of an underground cabling structure. These tools are used to determine the path of most types of buried utilities, but some utilities, such as underground piping, do not give off signals for the CAT to pick up on.
For this purpose, a Genny must be used in tandem with a CAT. A genny is used to generate a signal that bounces through the ground around the CAT, allowing the CAT to determine the location of a utility as the generated signal bounces off the utility and returns to the tool.
Although it isn't always necessary to use both a CAT and Genny simultaneously, it is always best practice to do so. This way you ensure that you don't miss anything buried underground and generate an accurate map of the underground installation. If a genny is not used, the CAT could easily miss buried utilities that do not generate a signal, posing a potential risk to the professionals excavating the ground.
