High Voltage Indicators & Detectors

- For use in MV cubicles
- High impedance detecting systems
- Voltage indication via 4mm sockets

- Detects voltage up to 1000V
- Integrates into MV cubicles
- Bright red LED indicators

- Voltage detection under 1000V
- Integrates into MV cubicles
- IEC 61958 compliance

- Permanently positioned
- Tension by a light
- Protection degree IP 65

- 5 to 36 kV or 5 to 66 kV
- Works without a battery
- Self-ignition when voltage detected

- Rated voltage: from 5 to 36 kV
- Frequency: 50 / 60 Hz
- Insulating telescopic pole included

- Rated voltage: from 5 to 36 kV
- 1.3m or 2m insulating pole
- Self-ignition when voltage detected

- Self-verification device
- Soltage presence indicator
- 50 V to 1 KV or 200 V to 5 KV

- Rated voltage: 25 kV AC
- Frequency: 50 / 60 Hz
- Work temperature range: from -25°C to +55°C

- Rated voltage: from 5 to 36 or 66 kV
- Frequency: 50 / 60 Hz
- Stops working when low battery

- Frequency: 50 / 60 Hz
- Climate category N
- Self-ignition when voltage detected

- Medium-voltage detection
- Self-checking system
- Wide operating temperature range: -25°C to +55°C
- Two models available

- Frequency: 50 / 60 Hz
- Push-button self-verification device
- 1 - 5 kV to 5 - 79 kV Voltage range

- Frequency: 50 / 60 Hz
- Automatic shutdown
- 1 - 3.3 kV to 22 - 79 kV Voltage range

- 3 to 10kV range
- Clips onto insulated poles
- LED and audible indication of voltage presence

- Fast response time
- High Impact ABS body
- Shock & drop resistant

- Fast response time
- High Impact ABS body
- Shock & drop resistant

- Voltage range: 500 V < Vt < 5000 V
- Operating temperature: -25°C to 55°C
- Humidity Range: 20 to 96 %

- AC induced voltage: 500 V < Vtac < 5000 V
- ALTERNATING current 50-60 Hz
- Operating Temperature: -25°C to 55°C

- Connects to busbars to indicate the presence of live voltage
- Shines bright diode lights when voltage is live
- Range from 5 to 75kV AC

- Duplicate neon indicators within shock resistant sleeves
- Permanently connected earth cable
- Hand guards on both elements

- Duplicate neon indicators within shock resistant sleeves
- Permanently connected earth cable
- Hand guards on all elements

- Resolution: 0.01kV
- Resistive Detector type
- Cable length: 2m

- Max system voltage of 19kV
- AC/DC neon indicators
- For use on earthed neutral electrical circuits
About High Voltage Indicators & Detectors
The best warning for an electrician of a hot power line is a high-voltage indicator. Other devices relying on secondary power sources or subject to protective measures such as fuses can give false positive readings because they are not working as a direct result of the electricity in the lines. A high-voltage indicator is very simple and very effective.
Most high-voltage indicators are simple circuits. They consist of a connector attached to a bus bar in the supply cabinet, and a light-emitting diode inside of a small housing with a window to view the light. The LED may or may not flash, but its illumination lets an electrician know the line is powered and must be shut off before work.
A voltage detector is a device that determines the presence or absence of an electrical charge in an object. It can be a simple, pen-shaped piece of testing hardware that indicates the existence of electricity or an advanced tool that detects precise voltage levels in electrical systems.
A voltage detector measures the flux lines of the electric field formed between the earth's potential and a live component of the system.