The Beha-Amprobe UAT-500-TE Transmitter issues 33kHz signals and is designed for use with Beha-Amprobe’s UAT-600-R Receiver. It can be used to find buried utilities at depths of up to100 feet and is suitable for tracing energised and deenergised wires, cables, and metallic and non-metallic pipes.
The Beha-Amprobe UAT-500-TE Transmitter offers the following tracing modes (for the modes to be effective the Beha-Amprobe UAT-500-TE Transmitter must be used with a receiver):
- Induction mode: the transmitter wirelessly induces a 33kHz signal into a buried pipe, cable or wire. The frequency is detected and traced using a receiver.
- Direct Test Leads Connection mode: connect the transmitter to an accessible point on buried de-energised cables or utilities using test leads; induce a 33kHz transmitting frequency. Trace the signal using a receiver. (Do not connect the transmitter to an energised circuit).
- Clamp mode: for cables/ utilities without a safe access point, an optional signal clamp (sold separately) can be used with the transmitter to apply a signal, which is traced using a receiver.
It is possible to use the Beha-Amprobe UAT-500-TE Transmitter to locate non-metallic pipes as often these pipes include metal traces that will carry the signal. Alternatively, conductive tracing tape can be used to find non-metallic pipes.
The Beha-Amprobe UAT-500-TE Transmitter is a portable, durable, and dependable 33kHz frequency transmitter. It is ideal for field technicians and engineers working in construction or transportation and may also prove useful to pipefitters, plumbers, government inspectors, and surveyors.
Beha-Amprobe UAT-500-TE Transmitter Key Features
- Issues 33kHz signals
- Designed for use with Beha-Amprobe’s UAT-600-R Receiver
- Find underground cables buried at depths of up to 100 feet
- Use with a receiver to trace energised and deenergised wires, cables, and metallic and non-metallic pipes
- Induction mode
- Direct Test Lead Connection mode
- Clamp mode
- Portable, durable, and dependable 33kHz transmitter
- Ideal for field technicians and engineers working in construction or transportation
- Suitable for pipefitters, plumbers, government inspectors, and surveyors
What’s Included?
- Beha-Amprobe UAT-500-TE Transmitter
Beha-Amprobe UAT-500-TE Transmitter Technical Specifications
UAT-500-TE Transmitter | |
Operating voltage | De-energized circuit only for Direct Connection Mode |
Transmitting frequency | 33 kHz |
Tracing modes | De-energized: Induction Mode Direct Connection Mode Clamp Mode |
Transmitting mode power output | Max. 1 watt |
Output voltage | Max. 35 V rms |
Output current | Max. 100 mA rms |
Locating modes | - |
Sensitivity adjustment (gain control) | - |
Depth measurement | - |
Depth measurement accuracy | - |
Sensitivity at 1 m (typical) | - |
Display backlight | - |
Visual signal indication | Two LEDs indicating LO and HI signal |
Audio signal indication | Continuous Signal Mode: Continuous audio tone Pulse Signal Mode: Fast pulsed audio tone |
Compatible receiver | UAT-600-RE Receiver |
Compatible transmitter | - |
Compatible accessories | SC-600-EUR Signal Clamp TL-UAT-500 Test lead set |
Display | - |
Update rate | - |
Operating temperature and humidity | -20 °C to 50 °C (-4 °F to 122 °F), ≤ 80% RH |
Storage temperature and humidity | -40 °C to 60 °C (-40 °F to 140 °F), ≤ 80% RH |
Operating altitude | < 2000 m (< 6561 ft) |
Pollution degree | 2 |
IP-rating | IP54 |
Drop proof | |
Power supply | Four (4) 1.5 V D cell alkaline batteries |
Auto power off | - |
Battery life | Approx. 12 hours at 21 °C (70 °F) (Typical) |
Low battery indication | Both LO and HI LEDs blink every 1.5 seconds and audio sound pulses every 1.5 seconds |
Measurement Category | - |
Safety compliance | IEC 61010-1, CSA/UL 61010-1, IEC 61010-031, CSA/UL 61010-031 (test leads) |
Electromagnetic Compatibility | IEC 61326-1 Korea (KCC): Class A Equipment (Industrial Broadcasting & Communication Equipment) [1] [1] This product meets requirements for industrial (Class A) electromagneticwave equipment and the seller or user should take notice of it. This equipment is intended for use in business environments and is not to be used in homes. |
Size (H x W x L) | Approx. 460 x 90 x 65 mm (18.1 x 3.5 x 2.6 in) |
Weight | Approx. 1.77 kg (3.9 lb) (batteries installed) |
SKU | 5263043 |
---|---|
Manufacturer Part Code | 5263043 |