Oscilloscope Accessories

• Pulse generator software program
• Optimised for use with Siglent’s SSG5000X RF Signal Generators
• Number of pulses: 1 ~ 2047

SAP1000 Active probe is a 1GHz active probe for use with SDS 5000X series of oscilloscopes.

• Vector network analyzer demonstration
• Integrated board

• Vector Network Analyzer
• S11 and S21 measurements
• Suitable for the SHA850A Series

• Available with 18 or 26 GHz bandwidth
• Adjust the distance between the test probes
• Built-in adjusting wheel

• 16 pairs of RF cables
• Perform compliance testing
• Suitable for Siglent SDS7000A series

• USB 2.0 protocols
• Perform compliance testing
• Suitable for Siglent SDS7000A series

• Frequency range of DC to 18 GHz or 26.5 GHz
• Adjust the distance between the test probes
• High-frequency measurements

• High-performance oven-controlled crystal oscillator
• Improve the frequency stability and accuracy
• Suitable for Siglent SNA5000A series

• Frequency range of DC to 26 GHz
• 25 inches or 635 mm length
• High-frequency measurements

• High bandwidth
• Accuracy up to 1%
• Powered by oscilloscope via SAPBUS

• 500 MHz to 1 GHz or 1 GHz to 2 GHz options
• Increase the bandwidth
• Suitable for the SDS6000A series

• 20 ns to 300 s pulse on/off time setting range
• 2047 pulses per trigger
• Suitable for the SSG5080A and SSG6080A series

• 20 ns to 300 s pulse width
• Generate pulse signals
• Suitable for the SSG5080A and SSG6080A series

• 9kHz - 4.5GHz, 9kHz - 9GHz, 9kHz - 13.5GHz, or 9kHz - 26.5GHz
• 2 or 4 Ports
• Suitable for vector network analyzers

• Testing and debugging IQ signal devices
• Excellent EVM performance
• Suitable for the SDG7000A series

• 350 MHz to 500 MHz or 500 MHz to 1 GHz options
• Increase the bandwidth
• Suitable for the SDG7000A series

• 10MHz ~ 200MHz, 200MHz ~ 500MHz, or 500MHz ~ 8GHz antenna
• Amplifier handle
• Suitable for the SHA850A Series

• Frequency upgrade
• 3.6 GHz to 7.5 GHz
• SHA851A into SHA852A

• Measure high-speed signals
• Low noise and high input impedance
• Attenuation ratio of 10:1

• 13.6 GHz to 20 GHz12
• Frequency Output Range upgrade
• Suitable for the SSG5080A and SSG6080A series

• 110 dB attenuator module
• Wider range of output power levels
• Suitable for Siglent SSG6000A series

• BT, IOT & OFDM options
• SigIQPro licences

• Three antennas
• Amplifier handle
• Suitable for the SHA850A Series