Cable Avoidance & Fault Location Accessories
-
£36.00 £30.00
- Accessory bag
- Suitable for the RD500 Series
30 Reward PointsPrice Match Guarantee10/C1 -
£66.71 £55.59
- Apply a signal directly to a pipe or cable
- Compatible with C. Scope’s SGA4, SGV4, MXT4 Signal Generators
- Facilitates the tracing of individual pipes or cables
55 Reward PointsPrice Match GuaranteeB4028A -
£72.00 £60.00
- Replacement battery tray
- Compatible with Radiodetection Precision Locators
60 Reward PointsPrice Match Guarantee10/RX-2DCELL-TRAY -
£88.80 £74.00C.A.T4/Genny4 Soft Carry Bag74 Reward PointsPrice Match Guarantee10/CAT/GEN2U
-
£149.40 £124.50
- Compatible with Genny signal generators
- UK style plug
- Maximum operating voltage 254Vrms and CAT II rated
124 Reward PointsPrice Match Guarantee10/GG1540-LPC -
£185.40 £154.50
- Apply a signal to a specific cable or pipe
- Supports 8kHz and 33kHz signals
- Allows a specific cable to be traced even when it is amongst other cables
154 Reward PointsPrice Match GuaranteeYIRC-33-8 -
£200.28 £166.90
- Issues a low-frequency signal that can be transmitted through metal pipe walls
- Trace pipes and locate blockages up to 5m below the ground
- Small, self-contained and specifically designed for use in metal pipes
166 Reward PointsPrice Match GuaranteeYIRS-512 -
£212.40 £177.00
- A battery-powered transmitter that issues a 33kHz signal
- Small, torpedo-shaped and hermetically sealed
- Trace non-metallic pipes and find blockages
177 Reward PointsPrice Match GuaranteeYIRS-33 -
£250.80 £209.00
- Live cable connection
- Connects to Genny products
- 440Vrms and CAT III rated
209 Reward PointsPrice Match Guarantee10/AC1231-G33-LCC-2 -
£285.48 £237.90
- Small diameter to prevent snagging in ducts and conduits
- Trace and find blockages in electrical, telecommunication and cable conduits and ducts
- Robust and weatherproof to IP65
237 Reward PointsPrice Match GuaranteeYIRSD-33 -
£298.80 £249.00
- Can be used with extension rod
- Apply a transmitter signal to a specific cable or pipe
249 Reward PointsPrice Match Guarantee10/TX-CLAMP-100 -
Free UK DeliveryRD 2" (50mm) Transmitter Clamp£318.00 £265.00
This clamp is used to apply a transmitter signal to a specific cable or pipe. This is particularly useful where direct connection is not possible, or on live cables when these cannot be de-energized. It can be used with the extension rod. (2" 50mm)
265 Reward PointsPrice Match Guarantee10/TX-CLAMP-50 -
Free UK DeliveryRadiodetection Genny Clamp 4" (100mm) - 10/GENNY-CLAMP-100£391.20 £326.00
- Standard Signal Clamp
- 4" (100mm)
- Suitable for use with the Radiodetection Genny
326 Reward PointsPrice Match Guarantee10/TC1769-RD4