The Kane Alert CO2 is a portable gas monitor that calculates and displays the carbon dioxide (CO2) and temperature of the air in an office, public building, commercial kitchen or other locations where indoor air quality is important.
With a built-in long-life NDIR sensor, the Alert CO2 can measure CO2 concentrations up to 3000 ppm and temperature from 0 to 50°C. It also has built-in memory, and will store 48 sets of CO2/temperature readings taken in the last 24 hours (logs one reading every 30 minutes).
This CO2 monitor also comes with a MAX/MIN mode which calculates the MAX/MIN values concentrations of CO2 and an alarm mode which will sound at 1000PPM to alert those around of CO2 spikes.
Kane Alert CO2 Indoor CO2 and Temperature Monitor Key Features
- Measures CO2 levels up to 3000ppm
- Measures temperature from 0 to 50°C
- MAX/MIN mode
- Alarm mode
- Logs up to 48 readings at 30 minute intervals
- Calculates and displays ventilation rates
- 80 hour battery life
- Fitted with tilt stand
- Kane C02 Monitor
- Mains Adapter
Files & Downloads:
Kane Alert Technical Specifications
|CO2 Via NDIR Sensor||Temperature|
|Measurement Range||0-3,000 ppm display||0 to 50°C / 32 to 122°F|
|Display Resolution||1ppm from 0~1,000ppm;
5ppm, from 1,000~2,000ppm;
10ppm from 2,000~3,000ppm
over 3000 ppm display shows "Hi"
|0.1°C / 0.1°F|
|Accuracy||±50 ppm, or ±5% of reading||±1°C / ±2°F|
|Temperature Dependence||±0.1% of reading per °C or ±2 ppm per °C,
whichever is greater, referenced to 25°C
|Pressure Dependence||0.13% of reading per mm Hg
(Corrected via user input for altitude)
|Warm-Up Time||< 60 seconds at 22°C|
|Response Time||< 2min for 63% of step change||20-30 minutes (case must equilibrate
|Calibration Interval||12 months|
|Operating Conditions||0 to 50°C, 0 to 95%RH non condensing|
|Dimensions||166mm long x 83mm high x 26mm deep|