Chauvin Arnoux PEL105 All-Terrain Power & Energy Logger Details
Made for field-use, the Chauvin Arnoux PEL105 is a portable power and energy logger with an all-terrain shockproof case. It's ideally suited for use mounted to electricity poles, but can also be used for a wide variety of different power/energy applications such as inside electrical cabinets, outdoors on buildings or on electrical transformers.
As it's made for use in the field, the PEL105 is rated IP67 and is waterproof for use in all weathers. It's also ruggedly designed and made to withstand high temperatures as well as UV light. The analyser is also self-powered by its own voltage inputs up to 1000V.
The Chauvin Arnoux PEL105 has 5 voltage inputs and 4 current inputs, giving you an extensive snapshot into a system's operation. It can be used on single phase, split phase and three phase (with or without neutral) as well as a wide variety of other specific configurations you may encounter when working.
With the PEL105, you can calculate, record and analyse a wide variety of power and energy values. This power/energy logger will measure and store W, var, VA power values, kWh, kvarh and kVAh energy values and will also record PF and DPF at the same time. Harmonics up to the 50th order can also be calculated as well as indication of phase sequence and the MIN/MAX values taken over a period of time.
All results are logged into the Chauvin Arnoux PEL105's memory as they happen, ready for further analysis at a later date. You can set the rate at which the PEL105 will log parameters from every minute up to every hour and results can be downloaded and to PC for further analysis using Chauvin Arnoux's software.
This analyser can communicate in a wide variety of ways - the analyser can connect via USB, using the SD card, Ethernet, WiFi or Bluetooth. It can even connect directly to your tablet or PC via the WiFi and Bluetooth.
Chauvin Arnoux PEL105 All-Terrain Power & Energy Logger Key Features
- Power and energy logger made for field use - ultra tough, waterproof, high temperature-resistant and UV light-resistant case
- Ideal for mounting electricity poles
- 5 voltage inputs and 4 current inputs
- Self-powered by voltage inputs up to 1000V
- Continuously records parameters at 200ms intervals (adjustable)
- Measurements in compliance with IEEE 1459
- CAT IV 1000V rated
- Large-size, triple display with integrated backlight
- Measure record and analyse W, var and VA power values
- Measure, record and analyse kWh, kvarh and kVAh energy values
- Record PF and DPF at the same time
- Recover measurements in real time using USB, SD card, ethernet, WiFi or Bluetooth
- Measure harmonics up to the 50th order
- Phase sequence function
- MIN/MAX recording on all functions
- Chauvin Arnoux PEL105 Logger
- 5 x 3m Black Silicone Cables
- 5 x Black 1000V CAT IV Croc Clips
- 1 Set of Inserts/Rings
- 4 x AmpFlex IP67 Current Clamps, 3m Length
- 1 Set of Washproof Plugs
- SD Card
- USB Cable
- Safety Datasheet
- Quick Start Guide
- Operating Manual (on USB Key)
The Chauvin Arnoux PEL105 is meant for use with several of Chauvin Arnoux's current clamps.
This kit is supplied with 4 x A196 clamps, but other clamps can be supplied separately. Please see the table for the full list of available clamps for this unit.
Model Number Measurement Range Clamping Diameter / Length IEC 61010 MN93 500mA to 200A (AC) 20mm CAT III 600V, CAT IV 300V MN 93A 0.005 to 100A (AC) 20mm CAT III 600V, CAT IV 300V MA193-250 200mA to 10kA (AC) 70mm / 250mm CAT III 1000V, CAT IV 600V MA193-350 200mA to 10kA (AC) 100mm / 350mm CAT III 1000V, CAT IV 600V PAC93 1A to 1000A (AC)
1A to 1300A (DC)
1 x 39mm
2 x 25mm
CAT III 600V, CAT IV 300V A193-450 200mA to 10kA AC 140mm / 450mm CAT III 1000V, CAT IV 600V A196-450 200mA to 10kA AC 140mm / 450mm CAT III 1000V, CAT IV 600V A193-800 200mA to 10kA AC 250mm / 800mm CAT III 1000V, CAT IV 600V C193 1A to 1000A (AC) 52mm CAT IV 600V E3N 50mA to 10A (AC/DC)
100mA to 100A (AC/DC)
11.8mm CAT III 600V, CAT IV 300V J93 50 to 3500A (AC)
50 to 5000A (DC)
72mm CAT IV 600V, CAT III 1000V
- Technical Specs
Chauvin Arnoux PEL105 Technical Specifications
General Display With backlit triple digital display Type of Installation Single phase, split phase, three phase (with or without neutral) + specific configurations Number of Inputs 5 voltage, 4 current Number of Channels 4 voltage, 4 current Measurements Network Frequency DC, 50Hz, 60Hz and 400Hz Voltage (Measurement Ranges / Best Accuracy) 10.00 to 1000V (AC) @ 50/60Hz or 600V AC @400Hz / 1000V DC Current (Depending on Sensors) (Measurement Ranges) 5mA to 10kA AC / 50mA to 5kA DC Calculated Measurements Ratio Up to 650,000V / up to 25,000A Power 20W to 10GW
20var to 10Gvar
20VA to 10GVA
Energy Up to 4EWh
4Evarh (E = 10 to the power of 18)
Phase Cos φ, tan Φ, PF Harmonics Up to the 50th order Recording Sampling Rate 128 samples/period Acquisition Rate 5 measurements/second Aggregation From 1 min to 1 hour Storage SD card (8GB) up to 32GB with SD-HC card) Communication Ethernet, Bluetooth, WiFi and USB Power Supply Self-powered internally from 94 to 1000V @ 50/60Hz and 400Hz / DC Safety IEC 61010-1, CAT IV 1000V Mechanical Specifications Dimensions 245 x 270 x 180mm Weight <4kg Protection IP67
We'd really appreciate it if you'd review this product
Why not leave a review of this product? Reviews help us improve our service for customers looking for a product to make a decision.No reviews have been found
Write Your Own Review