Clamp Adaptors
-
Free UK DeliveryFluke i410 AC/DC Current Clamp (400 A)£345.60 £288.00
- AC Current Max: 400 amp
- DC Current Max: 400 amp
- Heat-resistant rubber cables
288 Reward PointsPrice Match GuaranteeFLUCMA7 -
Free UK DeliveryFluke i200s AC Current Clamp (200 A)£358.80 £299.00
- Conductors up to 20m in diameter
- 10 to 100mV ranges
- CAT III 600V safety rated
299 Reward PointsPrice Match GuaranteeFLUCMA4 -
Free UK DeliveryFluke i400s AC Current Clamp (400A)£371.94 £309.95
- Enable current measurements up to 400A AC
- CAT IV 600V and CAT III 1000V safety rated
- Maximum conductor diameter of 32mm
309 Reward PointsPrice Match GuaranteeFLUCMA6 -
Free UK DeliveryFluke i410 Kit AC/DC Current Clamp (400 A) with Soft Case£398.40 £332.00
- Nominal current range 400 A, AC/DC
- Maximum voltage 600 V
- Output cable length 1.6 m
332 Reward PointsPrice Match GuaranteeFLUCMA8 -
Free UK DeliveryFluke i2000 flex AC Flexible Current Clamp (2000 A)£414.00 £345.00
- Measures up to 2000A AC
- BNC to Banana adaptor is included
- Max Conductor Diameter: 170mm
345 Reward PointsPrice Match GuaranteeFLUCMA12 -
Free UK DeliveryFluke i310s AC/DC Current Clamp (300A)£474.00 £395.00
- 19mm diameter jaws
- Measures current to 300A AC and 450A DC
- 30-hour battery life
- 2m cable length
395 Reward PointsPrice Match Guaranteei310s -
Free UK DeliveryFluke I5S-PR 1750 5A Current Clamp£526.80 £439.00
- Current from 0.05A to 5A
- Accurate non-intrusive measurements
- Suitable for use with the Fluke 1750 Power Recorder
439 Reward PointsPrice Match GuaranteeI5S-PR -
Free UK DeliveryFluke i30 AC/DC Current Clamp (30A)£558.00 £465.00
- Measure AC and DC
- 19mm diameter jaws
- Suitable for clamping onto smaller cables/conductors
465 Reward PointsPrice Match Guaranteei30 -
Free UK DeliveryFluke i1010 AC/DC Current Clamp (1000 A)£598.80 £499.00
- Measures up to 600 amps AC and 1000 amps DC
- Heat-resistant rubber cables
- Shrouded banana plugs
499 Reward PointsPrice Match GuaranteeFLUCMA9 -
Free UK DeliveryFluke EI-162X Clip-on Current Transformer (Sensing) with Shielded Cable Set£610.80 £509.00
- Clip-on current transformer
- Selective and Stakeless testing
- Suitable for use with the Fluke 1623 or 1625
509 Reward PointsPrice Match GuaranteeEI-162X -
Free UK DeliveryFluke i1010 Kit AC/DC Current Clamp (1000 A) with Soft Case£618.00 £515.00
- 1A to 600A of AC voltage
- 1A to 1000A of DC voltage
- Frequency range of 45Hz to 2kHz
515 Reward PointsPrice Match GuaranteeFLUCMA10 -
Free UK DeliveryFluke 3140R Clip-on Current Transformer 2A-400A (Fluke 1750)£658.80 £549.00
- 2A-400A
- Clip-on current transformer
- Suitable for use with the Fluke 1750
549 Reward PointsPrice Match Guarantee3140R -
Free UK DeliveryFluke i3000s flex-24 AC Flexible Current Clamp (3000 A) 610 mm£678.00 £565.00
- Flexible cable
- Measure current without breaking a circuit
- 30A, 300A and 3000A measurement ranges
565 Reward PointsPrice Match Guaranteei3000s flex-24 -
Free UK DeliveryFluke i5s AC Current Clamp (5 A)£696.00 £580.00
- Suitable for the Fluke 430 series
- Hard plastic and rubberized material
- Accurate readings without breaking circuits
580 Reward PointsPrice Match Guaranteei5s -
Free UK DeliveryFluke TPS Flex 24-TF-II 200/1000A Thin Flexi 61cm (24in)£706.80 £589.00
- Thin flex
- High quality
- Flexible current probe
589 Reward PointsPrice Match GuaranteeTPS FLEX 24-TF-II -
Free UK DeliveryFluke i30s AC/DC Current Clamp (30A)£810.00 £675.00
- Measure AC/DC
- Complex waveform currents
- 19mm in diameter jaws
675 Reward PointsPrice Match GuaranteeI30S -
Free UK DeliveryFluke i3000s flex-36 AC Flexible Current Clamp (3000 A) 915 mm£810.00 £675.00
- 7" diameter flexible cable
- Measure 30A, 300A, and 3000A
- CAT III 600V safety rated
675 Reward PointsPrice Match Guaranteei3000s flex-36 -
Free UK DeliveryFluke i1000s AC Current Clamp (1000 A)£838.80 £699.00
- Measure harmonics and waveforms
- 100mA and 1000 A RMS
- Passive filter
699 Reward PointsPrice Match GuaranteeFLUCMA11 -
Free UK DeliveryFluke i6000s flex-24 AC Current Clamp (6000 A)£876.00 £730.00
- Flexible probe allows for tricky testing
- Works with oscilloscopes, digital multimeters and more
- Easy to operate
730 Reward PointsPrice Match Guaranteei6000s flex-24 -
Free UK DeliveryFluke i3000s AC Current Clamp (3000 A)£930.00 £775.00
- Measure AC current up to 3000A
- BNC or banana input connectors
- Works with ocsilloscopes, multimeters and more
775 Reward PointsPrice Match GuaranteeFLUCMA14 -
Free UK DeliveryFluke i6000s flex-36 AC Current Clamp (6000 A)£978.00 £815.00
- Portable current measurements up to 6000A
- Works with recorders and ocsillioscopes
- Protected against interference for accurate, reliable testing
815 Reward PointsPrice Match Guaranteei6000s flex-36 -
Free UK DeliveryFluke i1A/10A CLAMP PQ4 4-phase Mini Current Clamp Set£1,030.80 £859.00
- Rubberised handles for extra safety
- Easy to use
- Connects to Fluke equipment
859 Reward PointsPrice Match Guaranteei1A/10A CLAMP PQ4 -
Free UK DeliveryFluke i20/200A CLAMP PQ4 3-phase Mini Current Clamp Set£1,030.80 £859.00
- Works with Fluke 1735 and 1740
- Clamp-on testing
859 Reward PointsPrice Match Guaranteei20/200A CLAMP PQ4 -
Free UK DeliveryFluke EI-1623 Selective/Stakeless Clamp Set£1,058.40 £882.00
- Suitable for the Fluke 1623-2 and 1625-2
- Selective and Stakeless testing
882 Reward PointsPrice Match GuaranteeEI-1623
About Clamp Adaptors
The clamp adaptor differs from a normal clamp meter - these instruments are not generally made for reading by themselves but are designed instead to interface with electrical testers such as multimeters to enable them to perform current measurements.
They come in a huge variety of shapes and sizes ranging from ultra-compact for fitting inside electrical cabinets to large sizes for measuring multiple conductors simultaneously or fitting around larger wires. Adaptors can also be made of flexible materials, allowing them to be bent around an application that simply wouldn't be possible when using a clamp meter.
It is important to note that not all clamp adaptors will work with all equipment - please read the description for which tester(s) the clamp you're looking at might be suitable.