or Call 01642 931 329 to discuss alternatives
The Socket & See VIPUKIT1 Safe Isolation Kit consists of the VIP100 Easy Voltage Tester and the SP200 Professional proving unit and comes with a case.
Socket & See VIP100 Easy Voltage Tester
Measure both AC and DC voltages with the easy to use socket & see VIP100 voltage tester, the VIP100 is a battery-free and is robust and ergonomically designed with an IP54 body and finger guards, HSE GS38 conforming prods and 1.4mm dual insulated silicon cable for a high safety standard.
When measuring voltage the tester will show clear LED indication and displays AC/DC Voltage in 2 steps – 230 and 400V.
- Two voltage indication 230V and 400V AC/DC
- No batteries required
- Conforms to HSE GS 38 tip standards
- Easy to use
Socket & See SP200 Professional Proving Unit
The Socket & See SP200 Proving Unit allows you to check the accuracy and operation of multimeters and two-pole voltage indicators, the unit generates outputs from 50 - 690V with a true AC waveform at 50Hz, meaning it will always read correctly when using the AC range of your tester.
The SP200 voltage ramp indication is displayed clearly using a red LED whereas low battery is indicated with a blue LED.
- Automatic operation and turn-off
- Easy to use
- Non-contact voltage detector facility
- Socket & See VIP 100 Easy Voltage Tester
- Socket & See SP200 Professional Proving Unit
- Socket & See TECC10 Instrument Carry Case
Socket & See VIPUKIT1 Safe Isolation Kit Technical Specifications
|Socket & See VIP100 Easy Voltage Tester|
|Operating Voltage Range||12 – 400V AC/DC|
|LED Indication||230 - 400V|
|Overvoltage Category||Cat IV 600V|
|Operating Current||<3.5 mA|
|Operating Duty Cycle||30s on, 240s off|
|Operating Conditions||-10 to +55ºC at 70% RH|
|Safety Compliance||BS EN 61010-2-030 :2010|
|Interconnecting Cable||1.4m Silicone rubber, Double insulated, Wear indicating, 690V continual rating, Tested at 6.5kV|
|Approximate Dimensions||170H x 25W x 20D (mm)|
|Socket & See SP200 Professional Proving Unit|
|Output Voltage||50 – 690V in five steps (50V, 100V, 230V, 400V, 690V)|
|Safety Compliance||BS EN 61010-1 : 2010|
|EMC Compliance||61326-1 :2006|
|Operating Conditions||-10 to +35°C at 95% RH|
|Output Frequency||50Hz Pseudo sine wave|
|Maximum Output Power||10W|
|Batteries||6 x LR6 AA alkaline batteries|
|Battery Life||10 hours with average use when testing|